alex
/
gluon-firmware2
forked from Freifunk-Leipzig/gluon-firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

ar71xx: add support for TP-Link Archer C58/C59/C60 (#1281)

This commit is contained in:
David Bauer 2018-01-16 18:51:12 +01:00 committed by Andreas Ziegler
parent fb93c3b259
commit 99b02701cc
13 changed files with 1599 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
package/gluon-core/luasrc/lib/gluon/upgrade/010-primary-mac
View File

@ -40,7 +40,9 @@ elseif platform.match('ar71xx', 'generic', {'unifi-outdoor-plus', 'carambola2',
'om5p-ac', 'om5p-acv2',
'archer-c7-v4'}) then
table.insert(try_files, 1, '/sys/class/net/eth0/address')
elseif platform.match('ar71xx', 'generic', {'archer-c5', 'archer-c7'}) then
elseif platform.match('ar71xx', 'generic', {'archer-c5', 'archer-c58-v1',
'archer-c59-v1', 'archer-c60-v1',
'archer-c7'}) then
table.insert(try_files, 1, '/sys/class/net/eth1/address')
end

757
patches/lede/0050-ar71xx-add-support-to-TP-Link-Archer-C59v1-and-C60v1.patch Normal file
View File

@ -0,0 +1,757 @@
From: Henryk Heisig <hyniu@o2.pl>
Date: Tue, 27 Dec 2016 22:41:41 +0100
Subject: ar71xx: add support to TP-Link Archer C59v1 and C60v1
TP-Link Archer C59v1 is a dual-band AC1350 router, based on Qualcomm/Atheros
QCA9561+QCA9886.
Specification:
- 775/650/258 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 2T2R 5 GHz
- 5x 10/100 Mbps Ethernet
- USB 2.0 port
- 8x LED (controled by 74HC595), 3x button
- UART header on PCB
TP-Link Archer C60v1 is a dual-band AC1350 router, based on Qualcomm/Atheros
QCA9561+QCA9886.
Specification:
- 775/650/258 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 8 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 2T2R 5 GHz
- 5x 10/100 Mbps Ethernet
- 7x LED, 2x button
- UART header on PCB
Currently not working:
- Port LAN1 on C59, LAN4 on C60
- WiFi 5GHz (missing ath10k firmware for QCA9886 chip)
- Update from oficial web interface ( tplink-saveloader not support "product-info")
Flash instruction:
1. Set PC to fixed ip address 192.168.0.66
2. Download lede-ar71xx-generic-archer-cXX-v1-squashfs-factory.bin
and rename it to tp_recovery.bin
3. Start a tftp server with the file tp_recovery.bin in its root directory
4. Turn off the router
5. Press and hold Reset button
6. Turn on router with the reset button pressed and wait ~15 seconds
7. Release the reset button and after a short time
the firmware should be transferred from the tftp server
8. Wait ~30 second to complete recovery.
Flash instruction under U-Boot, using UART:
1. tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin
2. erase 0x9f020000 +$filesize
3. cp.b $fileaddr 0x9f020000 $filesize
4. reset
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
[Jo-Philipp Wich: remove duplicate ATH79_MACH_ARCHER_C59/C60_V1 entries]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 47b90d9cb2f81936aed22cdf7d1f6d870d23c16e..8552cde564b3fbed9425f42d5331f95fe5c3aaa8 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -62,6 +62,19 @@ archer-c25-v1)
ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0" "0x04"
ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan4" "switch0" "0x02"
;;
+archer-c59-v1|\
+archer-c60-v1)
+ ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x3C"
+ ucidef_set_led_switch "wan" "WAN" "$board:green:wan" "switch0" "0x02"
+ ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt"
+ ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt"
+
+ case "$board" in
+ archer-c59-v1)
+ ucidef_set_led_usbdev "usb" "USB" "$board:green:usb" "1-1"
+ ;;
+ esac
+ ;;
arduino-yun)
ucidef_set_led_wlan "wlan" "WLAN" "arduino:blue:wlan" "phy0tpt"
ucidef_set_led_usbdev "usb" "USB" "arduino:white:usb" "1-1.1"
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 86ac949bca12561536ce2c8adb190eb004c162e4..3abe1114ee31c79abb125b85119876c3d75bb7c0 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -205,6 +205,11 @@ ar71xx_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
;;
+ archer-c59-v1|\
+ archer-c60-v1)
+ ucidef_add_switch "switch0" \
+ "0@eth0" "2:lan:4" "3:lan:3" "4:lan:2" "5:lan:1" "1:wan"
+ ;;
arduino-yun|\
dir-505-a1|\
tl-wa801nd-v3)
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 97372bed0ea2fadfab10f22916a1e0d6a9c65725..3aa1f054d4f791545a8b6644f7bd24f64ed546a3 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -52,6 +52,8 @@ get_status_led() {
;;
archer-c25-v1|\
archer-c7-v4|\
+ archer-c59-v1|\
+ archer-c60-v1|\
mr12|\
mr16|\
nbg6616|\
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 607bbd2c0ec4b59ba569550e9e0e87b80c7ddddb..5dd1d69e7e163c938759ce476846e4d985184b7b 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -97,6 +97,8 @@ case "$FIRMWARE" in
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
;;
archer-c25-v1|\
+ archer-c59-v1|\
+ archer-c60-v1|\
tl-wdr6500-v2)
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2)
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index ddb8f0db80ed6eab39c832bfd893182d9f591ad4..780eda30d04b9bae0bf8dcf47a9cc49b19b810ca 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -469,6 +469,12 @@ ar71xx_board_detect() {
*"Archer C7 v4")
name="archer-c7-v4"
;;
+ *"Archer C59 v1")
+ name="archer-c59-v1"
+ ;;
+ *"Archer C60 v1")
+ name="archer-c60-v1"
+ ;;
*"Archer C7")
name="archer-c7"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index d414af969912894574e73e286ed5a3998532d34e..31b293ca3c07d2f26ff96037fab5a51bbe9e834c 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -208,6 +208,8 @@ platform_check_image() {
ap90q|\
archer-c25-v1|\
archer-c7-v4|\
+ archer-c59-v1|\
+ archer-c60-v1|\
bullet-m|\
c-55|\
carambola2|\
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index 57b6d2e541d7ef9dea8570ba8de72164d97b9775..5b33d48e52309b807dbdf2697524809ad08072ae 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -52,6 +52,8 @@ CONFIG_ATH79_MACH_AP152=y
CONFIG_ATH79_MACH_AP90Q=y
CONFIG_ATH79_MACH_AP96=y
CONFIG_ATH79_MACH_ARCHER_C25_V1=y
+CONFIG_ATH79_MACH_ARCHER_C59_V1=y
+CONFIG_ATH79_MACH_ARCHER_C60_V1=y
CONFIG_ATH79_MACH_ARCHER_C7=y
CONFIG_ATH79_MACH_ARDUINO_YUN=y
CONFIG_ATH79_MACH_AW_NR580=y
@@ -272,6 +274,7 @@ CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_74X164=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_74X164=y
# CONFIG_GPIO_LATCH is not set
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 0a25294c40b5e2d3be825554ec7246a50b9c029b..468d9b333e43814cbadec8d85a20ab94e5cd6d01 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -1244,6 +1244,27 @@ config ATH79_MACH_ARCHER_C25_V1
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
+config ATH79_MACH_ARCHER_C59_V1
+ bool "TP-LINK Archer C59 v1 support"
+ select SOC_QCA956X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_ARCHER_C60_V1
+ bool "TP-LINK Archer C60 v1 support"
+ select SOC_QCA956X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_ARCHER_C7
bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support"
select SOC_QCA955X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index a0c73550eb0d5bf07ee731171be9e5ef9ff073e7..fbe7fcb0aebb6577b96c27088a158eb025f201cb 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -57,6 +57,8 @@ obj-$(CONFIG_ATH79_MACH_AP152) += mach-ap152.o
obj-$(CONFIG_ATH79_MACH_AP90Q) += mach-ap90q.o
obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C25_V1) += mach-archer-c25-v1.o
+obj-$(CONFIG_ATH79_MACH_ARCHER_C59_V1) += mach-archer-c59-v1.o
+obj-$(CONFIG_ATH79_MACH_ARCHER_C60_V1) += mach-archer-c60-v1.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7-v4.o
obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN) += mach-arduino-yun.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c
new file mode 100644
index 0000000000000000000000000000000000000000..28353aa77b05078b895ab48cf6b1ae53abe98ce2
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c
@@ -0,0 +1,223 @@
+/*
+ * TP-Link Archer C59 v1 board support
+ *
+ * Copyright (C) 2016 Henryk Heisig <hyniu@o2.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/spi/74x164.h>
+
+#include "common.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+#include "pci.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+
+#define ARCHER_C59_V1_KEYS_POLL_INTERVAL 20
+#define ARCHER_C59_V1_KEYS_DEBOUNCE_INTERVAL (3 * ARCHER_C59_V1_KEYS_POLL_INTERVAL)
+
+#define ARCHER_C59_V1_GPIO_BTN_RESET 21
+#define ARCHER_C59_V1_GPIO_BTN_RFKILL 2
+#define ARCHER_C59_V1_GPIO_BTN_WPS 1
+
+#define ARCHER_C59_V1_GPIO_USB_POWER 22
+
+#define ARCHER_C59_GPIO_SHIFT_OE 16
+#define ARCHER_C59_GPIO_SHIFT_SER 17
+#define ARCHER_C59_GPIO_SHIFT_SRCLK 18
+#define ARCHER_C59_GPIO_SHIFT_SRCLR 19
+#define ARCHER_C59_GPIO_SHIFT_RCLK 20
+
+#define ARCHER_C59_74HC_GPIO_BASE QCA956X_GPIO_COUNT
+#define ARCHER_C59_74HC_GPIO_LED_POWER 23
+#define ARCHER_C59_74HC_GPIO_LED_WLAN2 24
+#define ARCHER_C59_74HC_GPIO_LED_WLAN5 25
+#define ARCHER_C59_74HC_GPIO_LED_LAN 26
+#define ARCHER_C59_74HC_GPIO_LED_WAN_GREEN 27
+#define ARCHER_C59_74HC_GPIO_LED_WAN_AMBER 28
+#define ARCHER_C59_74HC_GPIO_LED_WPS 29
+#define ARCHER_C59_74HC_GPIO_LED_USB 30
+
+#define ARCHER_C59_V1_SSR_BIT_0 0
+#define ARCHER_C59_V1_SSR_BIT_1 1
+#define ARCHER_C59_V1_SSR_BIT_2 2
+#define ARCHER_C59_V1_SSR_BIT_3 3
+#define ARCHER_C59_V1_SSR_BIT_4 4
+#define ARCHER_C59_V1_SSR_BIT_5 5
+#define ARCHER_C59_V1_SSR_BIT_6 6
+#define ARCHER_C59_V1_SSR_BIT_7 7
+
+#define ARCHER_C59_V1_WMAC_CALDATA_OFFSET 0x1000
+#define ARCHER_C59_V1_PCI_CALDATA_OFFSET 0x5000
+
+static struct gpio_led archer_c59_v1_leds_gpio[] __initdata = {
+ {
+ .name = "archer-c59-v1:green:power",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_POWER,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c59-v1:green:wlan2g",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_WLAN2,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c59-v1:green:wlan5g",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_WLAN5,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c59-v1:green:lan",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_LAN,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c59-v1:green:wan",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c59-v1:amber:wan",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_WAN_AMBER,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c59-v1:green:wps",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_WPS,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c59-v1:green:usb",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_USB,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button archer_c59_v1_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = ARCHER_C59_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ARCHER_C59_V1_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+ {
+ .desc = "RFKILL button",
+ .type = EV_KEY,
+ .code = KEY_RFKILL,
+ .debounce_interval = ARCHER_C59_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ARCHER_C59_V1_GPIO_BTN_RFKILL,
+ .active_low = 1,
+ },
+ {
+ .desc = "WPS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = ARCHER_C59_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ARCHER_C59_V1_GPIO_BTN_WPS,
+ .active_low = 1,
+ },
+};
+
+static struct spi_gpio_platform_data archer_c59_v1_spi_data = {
+ .sck = ARCHER_C59_GPIO_SHIFT_SRCLK,
+ .miso = SPI_GPIO_NO_MISO,
+ .mosi = ARCHER_C59_GPIO_SHIFT_SER,
+ .num_chipselect = 1,
+};
+
+static u8 archer_c59_v1_ssr_initdata[] __initdata = {
+ BIT(ARCHER_C59_V1_SSR_BIT_7) |
+ BIT(ARCHER_C59_V1_SSR_BIT_6) |
+ BIT(ARCHER_C59_V1_SSR_BIT_5) |
+ BIT(ARCHER_C59_V1_SSR_BIT_4) |
+ BIT(ARCHER_C59_V1_SSR_BIT_3) |
+ BIT(ARCHER_C59_V1_SSR_BIT_2) |
+ BIT(ARCHER_C59_V1_SSR_BIT_1)
+};
+
+static struct gen_74x164_chip_platform_data archer_c59_v1_ssr_data = {
+ .base = ARCHER_C59_74HC_GPIO_BASE,
+ .num_registers = ARRAY_SIZE(archer_c59_v1_ssr_initdata),
+ .init_data = archer_c59_v1_ssr_initdata,
+};
+
+static struct platform_device archer_c59_v1_spi_device = {
+ .name = "spi_gpio",
+ .id = 1,
+ .dev = {
+ .platform_data = &archer_c59_v1_spi_data,
+ },
+};
+
+static struct spi_board_info archer_c59_v1_spi_info[] = {
+ {
+ .bus_num = 1,
+ .chip_select = 0,
+ .max_speed_hz = 10000000,
+ .modalias = "74x164",
+ .platform_data = &archer_c59_v1_ssr_data,
+ .controller_data = (void *) ARCHER_C59_GPIO_SHIFT_RCLK,
+ },
+};
+
+static void __init archer_c59_v1_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f010008);
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(NULL);
+ spi_register_board_info(archer_c59_v1_spi_info,
+ ARRAY_SIZE(archer_c59_v1_spi_info));
+ platform_device_register(&archer_c59_v1_spi_device);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c59_v1_leds_gpio),
+ archer_c59_v1_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, ARCHER_C59_V1_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(archer_c59_v1_gpio_keys),
+ archer_c59_v1_gpio_keys);
+
+ ath79_register_mdio(1, 0x0);
+
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_eth1_data.phy_mask = BIT(4);
+ ath79_register_eth(1);
+
+ ath79_register_wmac(art + ARCHER_C59_V1_WMAC_CALDATA_OFFSET, mac);
+ ap91_pci_init(art + ARCHER_C59_V1_PCI_CALDATA_OFFSET, NULL);
+
+
+ ath79_register_usb();
+ gpio_request_one(ARCHER_C59_V1_GPIO_USB_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+ gpio_request_one(ARCHER_C59_GPIO_SHIFT_OE,
+ GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
+ "LED control");
+ gpio_request_one(ARCHER_C59_GPIO_SHIFT_SRCLR,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "LED reset");
+}
+
+MIPS_MACHINE(ATH79_MACH_ARCHER_C59_V1, "ARCHER-C59-V1",
+ "TP-LINK Archer C59 v1", archer_c59_v1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c
new file mode 100644
index 0000000000000000000000000000000000000000..78186f02cda0a231afda4e53a1d6ff696ecb6b4a
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c
@@ -0,0 +1,135 @@
+/*
+ * TP-Link Archer C60 v1 board support
+ *
+ * Copyright (C) 2016 Henryk Heisig <hyniu@o2.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <linux/gpio.h>
+
+#include "common.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+#include "pci.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+
+#define ARCHER_C60_V1_GPIO_LED_LAN 2
+#define ARCHER_C60_V1_GPIO_LED_POWER 16
+#define ARCHER_C60_V1_GPIO_LED_WLAN2 17
+#define ARCHER_C60_V1_GPIO_LED_WLAN5 18
+#define ARCHER_C60_V1_GPIO_LED_WPS 19
+#define ARCHER_C60_V1_GPIO_LED_WAN_GREEN 20
+#define ARCHER_C60_V1_GPIO_LED_WAN_AMBER 22
+
+
+#define ARCHER_C60_V1_KEYS_POLL_INTERVAL 20
+#define ARCHER_C60_V1_KEYS_DEBOUNCE_INTERVAL (3 * ARCHER_C60_V1_KEYS_POLL_INTERVAL)
+
+#define ARCHER_C60_V1_GPIO_BTN_RESET 21
+#define ARCHER_C60_V1_GPIO_BTN_RFKILL 1
+
+
+
+#define ARCHER_C60_V1_WMAC_CALDATA_OFFSET 0x1000
+#define ARCHER_C60_V1_PCI_CALDATA_OFFSET 0x5000
+
+static struct gpio_led archer_c60_v1_leds_gpio[] __initdata = {
+ {
+ .name = "archer-c60-v1:green:power",
+ .gpio = ARCHER_C60_V1_GPIO_LED_POWER,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c60-v1:green:wlan2g",
+ .gpio = ARCHER_C60_V1_GPIO_LED_WLAN2,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c60-v1:green:wlan5g",
+ .gpio = ARCHER_C60_V1_GPIO_LED_WLAN5,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c60-v1:green:lan",
+ .gpio = ARCHER_C60_V1_GPIO_LED_LAN,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c60-v1:green:wan",
+ .gpio = ARCHER_C60_V1_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c60-v1:amber:wan",
+ .gpio = ARCHER_C60_V1_GPIO_LED_WAN_AMBER,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c60-v1:green:wps",
+ .gpio = ARCHER_C60_V1_GPIO_LED_WPS,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button archer_c60_v1_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = ARCHER_C60_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ARCHER_C60_V1_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+ {
+ .desc = "RFKILL button",
+ .type = EV_KEY,
+ .code = KEY_RFKILL,
+ .debounce_interval = ARCHER_C60_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ARCHER_C60_V1_GPIO_BTN_RFKILL,
+ .active_low = 1,
+ },
+};
+
+static void __init archer_c60_v1_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f010008);
+ u8 *art = (u8 *) KSEG1ADDR(0x1f7f0000);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c60_v1_leds_gpio),
+ archer_c60_v1_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, ARCHER_C60_V1_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(archer_c60_v1_gpio_keys),
+ archer_c60_v1_gpio_keys);
+
+ ath79_setup_qca956x_eth_cfg(QCA956X_ETH_CFG_SW_PHY_SWAP |
+ QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP);
+ ath79_register_mdio(1, 0x0);
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_register_eth(1);
+
+ ath79_register_wmac(art + ARCHER_C60_V1_WMAC_CALDATA_OFFSET, mac);
+ ap91_pci_init(art + ARCHER_C60_V1_PCI_CALDATA_OFFSET, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_ARCHER_C60_V1, "ARCHER-C60-V1",
+ "TP-LINK Archer C60 v1", archer_c60_v1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index e4623fd08836d59ad4e79e96f02e75e502a55ca6..9fbf354e44992f4dff43df0fb0ea99c344801d97 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -42,6 +42,8 @@ enum ath79_mach_type {
ATH79_MACH_AP96, /* Atheros AP96 */
ATH79_MACH_ARCHER_C25_V1, /* TP-LINK Archer C25 V1 board */
ATH79_MACH_ARCHER_C5, /* TP-LINK Archer C5 board */
+ ATH79_MACH_ARCHER_C59_V1, /* TP-LINK Archer C59 V1 board */
+ ATH79_MACH_ARCHER_C60_V1, /* TP-LINK Archer C60 V1 board */
ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */
ATH79_MACH_ARCHER_C7_V2, /* TP-LINK Archer C7 V2 board */
ATH79_MACH_ARCHER_C7_V4, /* TP-LINK Archer C7 V4 board */
diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk
index 27d6c73454aef96e5da47033ec664d2caffca1d5..9e4aa8ea30aedba8050a77ebdcfc8f0034cc14d1 100644
--- a/target/linux/ar71xx/image/tp-link.mk
+++ b/target/linux/ar71xx/image/tp-link.mk
@@ -119,6 +119,36 @@ define Device/archer-c25-v1
endef
TARGET_DEVICES += archer-c25-v1
+define Device/archer-c59-v1
+ DEVICE_TITLE := TP-LINK Archer C59 v1
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k
+ BOARDNAME := ARCHER-C59-V1
+ TPLINK_BOARD_NAME := ARCHER-C59-V1
+ DEVICE_PROFILE := ARCHERC59V1
+ IMAGE_SIZE := 14528k
+ KERNEL := kernel-bin | patch-cmdline | lzma | uImageArcher lzma
+ IMAGES := sysupgrade.bin factory.bin
+ IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
+ IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
+ MTDPARTS := spi0.0:64k(u-boot)ro,64k(mac)ro,1536k(kernel),12992k(rootfs),1664k(tplink)ro,64k(art)ro,14528k@0x20000(firmware)
+endef
+TARGET_DEVICES += archer-c59-v1
+
+define Device/archer-c60-v1
+ DEVICE_TITLE := TP-LINK Archer C60 v1
+ DEVICE_PACKAGES := kmod-ath10k
+ BOARDNAME := ARCHER-C60-V1
+ TPLINK_BOARD_NAME := ARCHER-C60-V1
+ DEVICE_PROFILE := ARCHERC60V1
+ IMAGE_SIZE := 7936k
+ KERNEL := kernel-bin | patch-cmdline | lzma | uImageArcher lzma
+ IMAGES := sysupgrade.bin factory.bin
+ IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
+ IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
+ MTDPARTS := spi0.0:64k(u-boot)ro,64k(mac)ro,1344k(kernel),6592k(rootfs),64k(tplink)ro,64k(art)ro,7936k@0x20000(firmware)
+endef
+TARGET_DEVICES += archer-c60-v1
+
define Device/cpe510-520
DEVICE_TITLE := TP-LINK CPE510/520
DEVICE_PACKAGES := rssileds
diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default
index f5af38a726f5ce33391223a4dbeb2fc0a8cac613..3f6884dcf44c83f9867e4e9936caa79c0abc5dc1 100644
--- a/target/linux/ar71xx/mikrotik/config-default
+++ b/target/linux/ar71xx/mikrotik/config-default
@@ -17,6 +17,8 @@
# CONFIG_ATH79_MACH_AP90Q is not set
# CONFIG_ATH79_MACH_AP96 is not set
# CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set
+# CONFIG_ATH79_MACH_ARCHER_C59_V1 is not set
+# CONFIG_ATH79_MACH_ARCHER_C60_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C7 is not set
# CONFIG_ATH79_MACH_ARDUINO_YUN is not set
# CONFIG_ATH79_MACH_AW_NR580 is not set
diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default
index 5c18f5d594d625f91ff10e21ddc5af2b3b4d768f..a50099aca12aafdcb27f4f2b77ca2a5ce4b4d6f2 100644
--- a/target/linux/ar71xx/nand/config-default
+++ b/target/linux/ar71xx/nand/config-default
@@ -10,6 +10,8 @@
# CONFIG_ATH79_MACH_AP147 is not set
# CONFIG_ATH79_MACH_AP96 is not set
# CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set
+# CONFIG_ATH79_MACH_ARCHER_C59_V1 is not set
+# CONFIG_ATH79_MACH_ARCHER_C60_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C7 is not set
# CONFIG_ATH79_MACH_AW_NR580 is not set
# CONFIG_ATH79_MACH_CAP324 is not set
diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c
index fec830c23ce6707755ddefc849f195872be1e877..aeebf8e0bbdc3ec53c42d5cc01a3ffe892b46804 100644
--- a/tools/firmware-utils/src/tplink-safeloader.c
+++ b/tools/firmware-utils/src/tplink-safeloader.c
@@ -376,6 +376,79 @@ static struct device_info boards[] = {
.last_sysupgrade_partition = "file-system"
},
+ /** Firmware layout for the C59v1 */
+ {
+ .id = "ARCHER-C59-V1",
+ .vendor = "",
+ .support_list =
+ "SupportList:\r\n"
+ "{product_name:Archer C59,product_ver:1.0.0,special_id:00000000}\r\n"
+ "{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
+ "{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
+ .support_trail = '\x00',
+ .soft_ver = "soft_ver:1.0.0\n",
+
+ .partitions = {
+ {"fs-uboot", 0x00000, 0x10000},
+ {"default-mac", 0x10000, 0x00200},
+ {"pin", 0x10200, 0x00200},
+ {"device-id", 0x10400, 0x00100},
+ {"product-info", 0x10500, 0x0fb00},
+ {"os-image", 0x20000, 0x180000},
+ {"file-system", 0x1a0000, 0xcb0000},
+ {"partition-table", 0xe50000, 0x10000},
+ {"soft-version", 0xe60000, 0x10000},
+ {"support-list", 0xe70000, 0x10000},
+ {"profile", 0xe80000, 0x10000},
+ {"default-config", 0xe90000, 0x10000},
+ {"user-config", 0xea0000, 0x40000},
+ {"usb-config", 0xee0000, 0x10000},
+ {"certificate", 0xef0000, 0x10000},
+ {"qos-db", 0xf00000, 0x40000},
+ {"log", 0xfe0000, 0x10000},
+ {"radio", 0xff0000, 0x10000},
+ {NULL, 0, 0}
+ },
+
+ .first_sysupgrade_partition = "os-image",
+ .last_sysupgrade_partition = "file-system",
+ },
+
+ /** Firmware layout for the C60v1 */
+ {
+ .id = "ARCHER-C60-V1",
+ .vendor = "",
+ .support_list =
+ "SupportList:\r\n"
+ "{product_name:Archer C60,product_ver:1.0.0,special_id:00000000}\r\n"
+ "{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
+ "{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
+ .support_trail = '\x00',
+ .soft_ver = "soft_ver:1.0.0\n",
+
+ .partitions = {
+ {"fs-uboot", 0x00000, 0x10000},
+ {"default-mac", 0x10000, 0x00200},
+ {"pin", 0x10200, 0x00200},
+ {"product-info", 0x10400, 0x00100},
+ {"partition-table", 0x10500, 0x00800},
+ {"soft-version", 0x11300, 0x00200},
+ {"support-list", 0x11500, 0x00100},
+ {"device-id", 0x11600, 0x00100},
+ {"profile", 0x11700, 0x03900},
+ {"default-config", 0x15000, 0x04000},
+ {"user-config", 0x19000, 0x04000},
+ {"os-image", 0x20000, 0x150000},
+ {"file-system", 0x170000, 0x678000},
+ {"certyficate", 0x7e8000, 0x08000},
+ {"radio", 0x7f0000, 0x10000},
+ {NULL, 0, 0}
+ },
+
+ .first_sysupgrade_partition = "os-image",
+ .last_sysupgrade_partition = "file-system",
+ },
+
/** Firmware layout for the C7 */
{
.id = "ARCHER-C7-V4",

128
patches/lede/0051-ar71xx-fix-lan-ports-on-archer-C59-and-C60.patch Normal file
View File

@ -0,0 +1,128 @@
From: Henryk Heisig <hyniu@o2.pl>
Date: Thu, 16 Feb 2017 15:22:49 +0100
Subject: ar71xx: fix lan ports on archer C59 and C60
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 8552cde564b3fbed9425f42d5331f95fe5c3aaa8..5c6b47d0249c979934d61078e16759fc22aa41c7 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -64,8 +64,8 @@ archer-c25-v1)
;;
archer-c59-v1|\
archer-c60-v1)
- ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x3C"
- ucidef_set_led_switch "wan" "WAN" "$board:green:wan" "switch0" "0x02"
+ ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x1E"
+ ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt"
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 3abe1114ee31c79abb125b85119876c3d75bb7c0..933ed22815ee076c98a83173aad143c010c9a131 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -206,9 +206,15 @@ ar71xx_setup_interfaces()
"0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
;;
archer-c59-v1|\
+ rb-450g)
+ ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
+ ucidef_add_switch "switch0" \
+ "0@eth1" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
+ ;;
archer-c60-v1)
+ ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ucidef_add_switch "switch0" \
- "0@eth0" "2:lan:4" "3:lan:3" "4:lan:2" "5:lan:1" "1:wan"
+ "0@eth1" "1:lan:1" "2:lan:2" "3:lan:3" "4:lan:4"
;;
arduino-yun|\
dir-505-a1|\
@@ -370,11 +376,6 @@ ar71xx_setup_interfaces()
ucidef_add_switch "switch0" \
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5@eth1"
;;
- rb-450g)
- ucidef_set_interfaces_lan_wan "eth1" "eth0"
- ucidef_add_switch "switch0" \
- "0@eth1" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
- ;;
routerstation-pro)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" \
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c
index 28353aa77b05078b895ab48cf6b1ae53abe98ce2..d55f9b9f75b38159ed7209aa5acd73ff31088b51 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c
@@ -194,19 +194,33 @@ static void __init archer_c59_v1_setup(void)
ARRAY_SIZE(archer_c59_v1_gpio_keys),
archer_c59_v1_gpio_keys);
+ ath79_setup_qca956x_eth_cfg(QCA956X_ETH_CFG_SW_PHY_SWAP |
+ QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP);
+
+ ath79_register_mdio(0, 0x0);
ath79_register_mdio(1, 0x0);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+
+ /* WAN port */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_register_eth(0);
+
+ /* LAN ports */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
ath79_eth1_data.speed = SPEED_1000;
ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_eth1_data.phy_mask = BIT(4);
+ ath79_switch_data.phy_poll_mask |= BIT(4);
+ ath79_switch_data.phy4_mii_en = 1;
ath79_register_eth(1);
ath79_register_wmac(art + ARCHER_C59_V1_WMAC_CALDATA_OFFSET, mac);
ap91_pci_init(art + ARCHER_C59_V1_PCI_CALDATA_OFFSET, NULL);
-
ath79_register_usb();
gpio_request_one(ARCHER_C59_V1_GPIO_USB_POWER,
GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c
index 78186f02cda0a231afda4e53a1d6ff696ecb6b4a..4d83fa737b9650935b4f7f985d58f471c38cd9da 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c
@@ -116,15 +116,25 @@ static void __init archer_c60_v1_setup(void)
ARRAY_SIZE(archer_c60_v1_gpio_keys),
archer_c60_v1_gpio_keys);
- ath79_setup_qca956x_eth_cfg(QCA956X_ETH_CFG_SW_PHY_SWAP |
- QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP);
+ ath79_register_mdio(0, 0x0);
ath79_register_mdio(1, 0x0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+ /* WAN port */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_register_eth(0);
+
+ /* LAN ports */
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
ath79_eth1_data.speed = SPEED_1000;
ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_switch_data.phy_poll_mask |= BIT(4);
+ ath79_switch_data.phy4_mii_en = 1;
ath79_register_eth(1);
ath79_register_wmac(art + ARCHER_C60_V1_WMAC_CALDATA_OFFSET, mac);

411
patches/lede/0052-ar71xx-add-support-for-TP-Link-Archer-C58-v1.patch Normal file
View File

@ -0,0 +1,411 @@
From: Henryk Heisig <hyniu@o2.pl>
Date: Fri, 16 Jun 2017 15:26:30 +0200
Subject: ar71xx: add support for TP-Link Archer C58 v1
TP-Link Archer C58 v1 is a dual-band AC1350 router, based on Qualcomm
QCA9561 + QCA9886. It looks like Archer C59 v1 without USB port.
Specification:
- 775/650/258 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 8 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 2T2R 5 GHz
- 5x 10/100 Mbps Ethernet
- 6x LED, 3x button
- UART header on PCB, RX, TX at TP4+5 (backside)
QCA9886 wlan needs pre_cal_data file and enable ieee80211 phy hotplug to
patch macaddress.
Flash instruction:
Use "factory" image directly in vendor GUI.
Recovery method:
1. Set PC to fixed ip address 192.168.0.66/24.
2. Download "lede-ar71xx-generic-archer-c58-v1-squashfs-factory.bin" and
rename it to "tp_recovery.bin".
3. Start a tftp server with the file "tp_recovery.bin" in its root
directory.
4. Turn off the router.
5. Press and hold Reset button.
6. Turn on router with the reset button pressed and wait ~15 seconds.
7. Release the reset button and after a short time the firmware should
be transferred from the tftp server.
8. Wait ~30 second to complete recovery.
Flash instruction under U-Boot, using UART:
tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin
erase 0x9f020000 +$filesize
cp.b $fileaddr 0x9f020000 $filesize
reset
This commit is based on GitHub PR#1112
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 5c6b47d0249c979934d61078e16759fc22aa41c7..f9483e9a706fbd98ce6a42e968bc0d31e9da5c84 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -62,6 +62,7 @@ archer-c25-v1)
ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0" "0x04"
ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan4" "switch0" "0x02"
;;
+archer-c58-v1|\
archer-c59-v1|\
archer-c60-v1)
ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x1E"
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 933ed22815ee076c98a83173aad143c010c9a131..57bc912aa5ede22a3fad4af6a1deb00c33f17cf8 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -205,6 +205,7 @@ ar71xx_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
;;
+ archer-c58-v1|\
archer-c59-v1|\
rb-450g)
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 3aa1f054d4f791545a8b6644f7bd24f64ed546a3..382500b75ee6dc1fe1126fb3121f4ae205c901d4 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -52,6 +52,7 @@ get_status_led() {
;;
archer-c25-v1|\
archer-c7-v4|\
+ archer-c58-v1|\
archer-c59-v1|\
archer-c60-v1|\
mr12|\
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 5dd1d69e7e163c938759ce476846e4d985184b7b..538c86e4743109f7665096da32620d7862248aea 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -134,6 +134,13 @@ case "$FIRMWARE" in
;;
esac
;;
+"ath10k/pre-cal-pci-0000:00:00.0.bin")
+ case $board in
+ archer-c58-v1)
+ ath10kcal_extract "art" 20480 12064
+ ;;
+ esac
+ ;;
*)
exit 1
;;
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
new file mode 100644
index 0000000000000000000000000000000000000000..7d2eca546d76b771b12026788510f73a293a9a93
--- /dev/null
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -0,0 +1,21 @@
+#!/bin/ash
+
+[ "$ACTION" == "add" ] || exit 0
+
+PHYNBR=${DEVPATH##*/phy}
+
+[ -n $PHYNBR ] || exit 0
+
+. /lib/ar71xx.sh
+. /lib/functions/system.sh
+
+board=$(ar71xx_board_name)
+
+case "$board" in
+ archer-c58-v1)
+ echo $(macaddr_add $(mtd_get_mac_binary mac 8) $(($PHYNBR - 1)) ) > /sys${DEVPATH}/macaddress
+ ;;
+ *)
+ ;;
+esac
+
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 780eda30d04b9bae0bf8dcf47a9cc49b19b810ca..a6cce7f42b43863f5bddade8ab6a0631c919beb1 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -469,6 +469,9 @@ ar71xx_board_detect() {
*"Archer C7 v4")
name="archer-c7-v4"
;;
+ *"Archer C58 v1")
+ name="archer-c58-v1"
+ ;;
*"Archer C59 v1")
name="archer-c59-v1"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 31b293ca3c07d2f26ff96037fab5a51bbe9e834c..4a586ca523dcd65d0abbbab14e979f6f1bfee34e 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -208,6 +208,7 @@ platform_check_image() {
ap90q|\
archer-c25-v1|\
archer-c7-v4|\
+ archer-c58-v1|\
archer-c59-v1|\
archer-c60-v1|\
bullet-m|\
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index 5b33d48e52309b807dbdf2697524809ad08072ae..396a4fa02adb37c6e5f9f7f1cc40fd1014361654 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -52,6 +52,7 @@ CONFIG_ATH79_MACH_AP152=y
CONFIG_ATH79_MACH_AP90Q=y
CONFIG_ATH79_MACH_AP96=y
CONFIG_ATH79_MACH_ARCHER_C25_V1=y
+CONFIG_ATH79_MACH_ARCHER_C58_V1=y
CONFIG_ATH79_MACH_ARCHER_C59_V1=y
CONFIG_ATH79_MACH_ARCHER_C60_V1=y
CONFIG_ATH79_MACH_ARCHER_C7=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 468d9b333e43814cbadec8d85a20ab94e5cd6d01..4c9012acc6b4c40d88ffc8752086cac86b9b9c92 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -1244,6 +1244,16 @@ config ATH79_MACH_ARCHER_C25_V1
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
+config ATH79_MACH_ARCHER_C58_V1
+ bool "TP-LINK Archer C58 v1 support"
+ select SOC_QCA956X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_ARCHER_C59_V1
bool "TP-LINK Archer C59 v1 support"
select SOC_QCA956X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index fbe7fcb0aebb6577b96c27088a158eb025f201cb..8408894669dc5f14f05701359073ef233a1b89f0 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -57,6 +57,7 @@ obj-$(CONFIG_ATH79_MACH_AP152) += mach-ap152.o
obj-$(CONFIG_ATH79_MACH_AP90Q) += mach-ap90q.o
obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C25_V1) += mach-archer-c25-v1.o
+obj-$(CONFIG_ATH79_MACH_ARCHER_C58_V1) += mach-archer-c59-v1.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C59_V1) += mach-archer-c59-v1.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C60_V1) += mach-archer-c60-v1.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c
index d55f9b9f75b38159ed7209aa5acd73ff31088b51..f385d4a5a3148b83ee01007145e0eda2c0ef670f 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c
@@ -1,7 +1,7 @@
/*
- * TP-Link Archer C59 v1 board support
+ * TP-Link Archer C58/C59 v1 board support
*
- * Copyright (C) 2016 Henryk Heisig <hyniu@o2.pl>
+ * Copyright (C) 2017 Henryk Heisig <hyniu@o2.pl>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
@@ -65,6 +65,44 @@
#define ARCHER_C59_V1_WMAC_CALDATA_OFFSET 0x1000
#define ARCHER_C59_V1_PCI_CALDATA_OFFSET 0x5000
+static struct gpio_led archer_c58_v1_leds_gpio[] __initdata = {
+ {
+ .name = "archer-c58-v1:green:power",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_POWER,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c58-v1:green:wlan2g",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_WLAN2,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c58-v1:green:wlan5g",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_WLAN5,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c58-v1:green:lan",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_LAN,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c58-v1:green:wan",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c58-v1:amber:wan",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_WAN_AMBER,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c58-v1:green:wps",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_WPS,
+ .active_low = 1,
+ },
+};
+
static struct gpio_led archer_c59_v1_leds_gpio[] __initdata = {
{
.name = "archer-c59-v1:green:power",
@@ -177,7 +215,7 @@ static struct spi_board_info archer_c59_v1_spi_info[] = {
},
};
-static void __init archer_c59_v1_setup(void)
+static void __init archer_c5x_v1_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f010008);
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
@@ -187,9 +225,6 @@ static void __init archer_c59_v1_setup(void)
ARRAY_SIZE(archer_c59_v1_spi_info));
platform_device_register(&archer_c59_v1_spi_device);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c59_v1_leds_gpio),
- archer_c59_v1_leds_gpio);
-
ath79_register_gpio_keys_polled(-1, ARCHER_C59_V1_KEYS_POLL_INTERVAL,
ARRAY_SIZE(archer_c59_v1_gpio_keys),
archer_c59_v1_gpio_keys);
@@ -233,5 +268,22 @@ static void __init archer_c59_v1_setup(void)
"LED reset");
}
+static void __init archer_c58_v1_setup(void)
+{
+ archer_c5x_v1_setup();
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c58_v1_leds_gpio),
+ archer_c58_v1_leds_gpio);
+}
+
+MIPS_MACHINE(ATH79_MACH_ARCHER_C58_V1, "ARCHER-C58-V1",
+ "TP-LINK Archer C58 v1", archer_c58_v1_setup);
+
+static void __init archer_c59_v1_setup(void)
+{
+ archer_c5x_v1_setup();
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c59_v1_leds_gpio),
+ archer_c59_v1_leds_gpio);
+}
+
MIPS_MACHINE(ATH79_MACH_ARCHER_C59_V1, "ARCHER-C59-V1",
"TP-LINK Archer C59 v1", archer_c59_v1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 9fbf354e44992f4dff43df0fb0ea99c344801d97..72c1e38c74707aba8fbd3aebc36f35becabd4987 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -42,6 +42,7 @@ enum ath79_mach_type {
ATH79_MACH_AP96, /* Atheros AP96 */
ATH79_MACH_ARCHER_C25_V1, /* TP-LINK Archer C25 V1 board */
ATH79_MACH_ARCHER_C5, /* TP-LINK Archer C5 board */
+ ATH79_MACH_ARCHER_C58_V1, /* TP-LINK Archer C58 V1 board */
ATH79_MACH_ARCHER_C59_V1, /* TP-LINK Archer C59 V1 board */
ATH79_MACH_ARCHER_C60_V1, /* TP-LINK Archer C60 V1 board */
ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */
diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk
index 9e4aa8ea30aedba8050a77ebdcfc8f0034cc14d1..557bcdab2237a03957313cc3cda471a9fe3a3706 100644
--- a/target/linux/ar71xx/image/tp-link.mk
+++ b/target/linux/ar71xx/image/tp-link.mk
@@ -119,6 +119,21 @@ define Device/archer-c25-v1
endef
TARGET_DEVICES += archer-c25-v1
+define Device/archer-c58-v1
+ DEVICE_TITLE := TP-LINK Archer C58 v1
+ DEVICE_PACKAGES := kmod-ath10k
+ BOARDNAME := ARCHER-C58-V1
+ TPLINK_BOARD_NAME := ARCHER-C58-V1
+ DEVICE_PROFILE := ARCHERC58V1
+ IMAGE_SIZE := 7936k
+ KERNEL := kernel-bin | patch-cmdline | lzma | uImageArcher lzma
+ IMAGES := sysupgrade.bin factory.bin
+ IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
+ IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
+ MTDPARTS := spi0.0:64k(u-boot)ro,64k(mac)ro,1344k(kernel),6592k(rootfs),64k(tplink)ro,64k(art)ro,7936k@0x20000(firmware)
+endef
+TARGET_DEVICES += archer-c58-v1
+
define Device/archer-c59-v1
DEVICE_TITLE := TP-LINK Archer C59 v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k
diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default
index 3f6884dcf44c83f9867e4e9936caa79c0abc5dc1..23e862762600f0724a37fe1a390d4d09639c472c 100644
--- a/target/linux/ar71xx/mikrotik/config-default
+++ b/target/linux/ar71xx/mikrotik/config-default
@@ -17,6 +17,7 @@
# CONFIG_ATH79_MACH_AP90Q is not set
# CONFIG_ATH79_MACH_AP96 is not set
# CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set
+# CONFIG_ATH79_MACH_ARCHER_C58_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C59_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C60_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C7 is not set
diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default
index a50099aca12aafdcb27f4f2b77ca2a5ce4b4d6f2..c11ccfe29795d013776870cf21fb6ca8d907af1b 100644
--- a/target/linux/ar71xx/nand/config-default
+++ b/target/linux/ar71xx/nand/config-default
@@ -10,6 +10,7 @@
# CONFIG_ATH79_MACH_AP147 is not set
# CONFIG_ATH79_MACH_AP96 is not set
# CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set
+# CONFIG_ATH79_MACH_ARCHER_C58_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C59_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C60_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C7 is not set
diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c
index aeebf8e0bbdc3ec53c42d5cc01a3ffe892b46804..67e2c4475bbd468bd20915767a481711ae872a3a 100644
--- a/tools/firmware-utils/src/tplink-safeloader.c
+++ b/tools/firmware-utils/src/tplink-safeloader.c
@@ -376,6 +376,41 @@ static struct device_info boards[] = {
.last_sysupgrade_partition = "file-system"
},
+ /** Firmware layout for the C58v1 */
+ {
+ .id = "ARCHER-C58-V1",
+ .vendor = "",
+ .support_list =
+ "SupportList:\r\n"
+ "{product_name:Archer C58,product_ver:1.0.0,special_id:00000000}\r\n"
+ "{product_name:Archer C58,product_ver:1.0.0,special_id:45550000}\r\n"
+ "{product_name:Archer C58,product_ver:1.0.0,special_id:55530000}\r\n",
+ .support_trail = '\x00',
+ .soft_ver = "soft_ver:1.0.0\n",
+
+ .partitions = {
+ {"fs-uboot", 0x00000, 0x10000},
+ {"default-mac", 0x10000, 0x00200},
+ {"pin", 0x10200, 0x00200},
+ {"product-info", 0x10400, 0x00100},
+ {"partition-table", 0x10500, 0x00800},
+ {"soft-version", 0x11300, 0x00200},
+ {"support-list", 0x11500, 0x00100},
+ {"device-id", 0x11600, 0x00100},
+ {"profile", 0x11700, 0x03900},
+ {"default-config", 0x15000, 0x04000},
+ {"user-config", 0x19000, 0x04000},
+ {"os-image", 0x20000, 0x150000},
+ {"file-system", 0x170000, 0x678000},
+ {"certyficate", 0x7e8000, 0x08000},
+ {"radio", 0x7f0000, 0x10000},
+ {NULL, 0, 0}
+ },
+
+ .first_sysupgrade_partition = "os-image",
+ .last_sysupgrade_partition = "file-system",
+ },
+
/** Firmware layout for the C59v1 */
{
.id = "ARCHER-C59-V1",

21
patches/lede/0053-ath10k-firmware-update-repository.patch Normal file
View File

@ -0,0 +1,21 @@
From: David Bauer <mail@david-bauer.net>
Date: Thu, 11 Jan 2018 21:17:15 +0100
Subject: ath10k-firmware: update repository
diff --git a/package/firmware/ath10k-firmware/Makefile b/package/firmware/ath10k-firmware/Makefile
index 8bf5729fff16677ef6449498f1df3cda19272583..81dce0eb7aeee20e2ed3be4cc6699bf867487a96 100644
--- a/package/firmware/ath10k-firmware/Makefile
+++ b/package/firmware/ath10k-firmware/Makefile
@@ -8,9 +8,9 @@
include $(TOPDIR)/rules.mk
PKG_NAME:=ath10k-firmware
-PKG_SOURCE_DATE:=2017-01-11
-PKG_SOURCE_VERSION:=ab432c60437931a165f0aff1a6e3371f358b75dd
-PKG_MIRROR_HASH:=e3188ecd4d7470d3cdde89fefa6258f9ec4f404b23558d1474e5014679b28101
+PKG_SOURCE_DATE:=2017-03-29
+PKG_SOURCE_VERSION:=956e2609b7e42c8c710bba10ef925a5be1be5137
+PKG_MIRROR_HASH:=25f724ff38c830281b3efba4a4ddffaae0c4bd8fea0f4c1061591229ff05535b
PKG_RELEASE:=1
PKG_SOURCE_PROTO:=git

53
patches/lede/0054-ath10k-firmware-add-qca9888-firmware.patch Normal file
View File

@ -0,0 +1,53 @@
From: John Crispin <john@phrozen.org>
Date: Mon, 8 May 2017 08:51:46 +0200
Subject: ath10k-firmware: add qca9888 firmware
the firmware files for qca9888 were previously not packaged. add the meta
information for doing so.
Signed-off-by: John Crispin <john@phrozen.org>
diff --git a/package/firmware/ath10k-firmware/Makefile b/package/firmware/ath10k-firmware/Makefile
index 81dce0eb7aeee20e2ed3be4cc6699bf867487a96..aac8ee2b271678b03f58a6cb68beae6d53467dc1 100644
--- a/package/firmware/ath10k-firmware/Makefile
+++ b/package/firmware/ath10k-firmware/Makefile
@@ -32,6 +32,11 @@ $(Package/ath10k-firmware-default)
TITLE:=ath10k firmware for QCA9887 devices
endef
+define Package/ath10k-firmware-qca9888
+$(Package/ath10k-firmware-default)
+ TITLE:=ath10k firmware for QCA9888 devices
+endef
+
define Package/ath10k-firmware-qca9887-ct
$(Package/ath10k-firmware-default)
TITLE:=ath10k-CT firmware for QCA9887 devices
@@ -240,6 +245,19 @@ define Package/ath10k-firmware-qca9887/install
$(1)/lib/firmware/ath10k/QCA9887/hw1.0/board.bin
endef
+define Package/ath10k-firmware-qca9888/install
+ $(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9888/hw2.0
+ $(INSTALL_DATA) \
+ $(PKG_BUILD_DIR)/QCA9888/hw2.0/board-2.bin \
+ $(1)/lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
+ $(INSTALL_DATA) \
+ $(PKG_BUILD_DIR)/QCA9888/hw2.0/board-2.bin \
+ $(1)/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+ $(INSTALL_DATA) \
+ $(PKG_BUILD_DIR)/QCA9888/hw2.0/firmware-5.bin_10.4-3.2-00072 \
+ $(1)/lib/firmware/ath10k/QCA9888/hw2.0/firmware-5.bin
+endef
+
define Package/ath10k-firmware-qca988x/install
$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA988X/hw2.0
$(INSTALL_DATA) \
@@ -328,6 +346,7 @@ define Package/ath10k-firmware-qca9984-ct/install
endef
$(eval $(call BuildPackage,ath10k-firmware-qca9887))
+$(eval $(call BuildPackage,ath10k-firmware-qca9888))
$(eval $(call BuildPackage,ath10k-firmware-qca988x))
$(eval $(call BuildPackage,ath10k-firmware-qca99x0))
$(eval $(call BuildPackage,ath10k-firmware-qca6174))

20
patches/lede/0055-ar71xx-fix-board.bin-used-by-QCA9886-in-Archer-C58-C59-C60.patch Normal file
View File

@ -0,0 +1,20 @@
From: Henryk Heisig <hyniu@o2.pl>
Date: Thu, 29 Jun 2017 15:38:22 +0200
Subject: ar71xx: fix board.bin used by QCA9886 in Archer C58/C59/C60
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
(cherry picked from commit e917e51bf91fc7cb5085bda5e67d62520801f9cc)
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 538c86e4743109f7665096da32620d7862248aea..cfdc20455d61c3900473f57c3267b1a3fd10e150 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -138,6 +138,8 @@ case "$FIRMWARE" in
case $board in
archer-c58-v1)
ath10kcal_extract "art" 20480 12064
+ ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
;;
esac
;;

71
patches/lede/0056-ar71xx-Archer-C58-C59-C60-fix-qca9886-wireless-interface.patch Normal file
View File

@ -0,0 +1,71 @@
From: Henryk Heisig <hyniu@o2.pl>
Date: Thu, 29 Jun 2017 15:20:31 +0200
Subject: ar71xx: Archer C58/C59/C60 fix qca9886 wireless interface
This commit fix 5GHz wireless interface used in Archer C58/C59/C60v1
and set correctly MAC address on this interface.
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
(cherry picked from commit 34958c826915cf864833ed8ba6e5b49d44c6cb41)
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index cfdc20455d61c3900473f57c3267b1a3fd10e150..91bdf0d3c591516f58030b165052b3dd2751314f 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -136,7 +136,9 @@ case "$FIRMWARE" in
;;
"ath10k/pre-cal-pci-0000:00:00.0.bin")
case $board in
- archer-c58-v1)
+ archer-c58-v1|\
+ archer-c59-v1|\
+ archer-c60-v1)
ath10kcal_extract "art" 20480 12064
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index 7d2eca546d76b771b12026788510f73a293a9a93..669b208231e43fe86e998c7202c133c86ae0bf8d 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -12,7 +12,9 @@ PHYNBR=${DEVPATH##*/phy}
board=$(ar71xx_board_name)
case "$board" in
- archer-c58-v1)
+ archer-c58-v1|\
+ archer-c59-v1|\
+ archer-c60-v1)
echo $(macaddr_add $(mtd_get_mac_binary mac 8) $(($PHYNBR - 1)) ) > /sys${DEVPATH}/macaddress
;;
*)
diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk
index 557bcdab2237a03957313cc3cda471a9fe3a3706..ed45866fcbe8d35af663799a91b09b5c8fd613bc 100644
--- a/target/linux/ar71xx/image/tp-link.mk
+++ b/target/linux/ar71xx/image/tp-link.mk
@@ -121,7 +121,7 @@ TARGET_DEVICES += archer-c25-v1
define Device/archer-c58-v1
DEVICE_TITLE := TP-LINK Archer C58 v1
- DEVICE_PACKAGES := kmod-ath10k
+ DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca9888
BOARDNAME := ARCHER-C58-V1
TPLINK_BOARD_NAME := ARCHER-C58-V1
DEVICE_PROFILE := ARCHERC58V1
@@ -136,7 +136,7 @@ TARGET_DEVICES += archer-c58-v1
define Device/archer-c59-v1
DEVICE_TITLE := TP-LINK Archer C59 v1
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k ath10k-firmware-qca9888
BOARDNAME := ARCHER-C59-V1
TPLINK_BOARD_NAME := ARCHER-C59-V1
DEVICE_PROFILE := ARCHERC59V1
@@ -151,7 +151,7 @@ TARGET_DEVICES += archer-c59-v1
define Device/archer-c60-v1
DEVICE_TITLE := TP-LINK Archer C60 v1
- DEVICE_PACKAGES := kmod-ath10k
+ DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca9888
BOARDNAME := ARCHER-C60-V1
TPLINK_BOARD_NAME := ARCHER-C60-V1
DEVICE_PROFILE := ARCHERC60V1

20
patches/lede/0057-ath10k-firmware-qca9888-firmware-remove-board.bin.patch Normal file
View File

@ -0,0 +1,20 @@
From: Henryk Heisig <hyniu@o2.pl>
Date: Mon, 3 Jul 2017 23:59:54 +0200
Subject: ath10k-firmware: qca9888 firmware: remove board.bin
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
diff --git a/package/firmware/ath10k-firmware/Makefile b/package/firmware/ath10k-firmware/Makefile
index aac8ee2b271678b03f58a6cb68beae6d53467dc1..e8cc4b91c3f59f09e4281c7b36048dc66bd04f3b 100644
--- a/package/firmware/ath10k-firmware/Makefile
+++ b/package/firmware/ath10k-firmware/Makefile
@@ -250,9 +250,6 @@ define Package/ath10k-firmware-qca9888/install
$(INSTALL_DATA) \
$(PKG_BUILD_DIR)/QCA9888/hw2.0/board-2.bin \
$(1)/lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
- $(INSTALL_DATA) \
- $(PKG_BUILD_DIR)/QCA9888/hw2.0/board-2.bin \
- $(1)/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
$(INSTALL_DATA) \
$(PKG_BUILD_DIR)/QCA9888/hw2.0/firmware-5.bin_10.4-3.2-00072 \
$(1)/lib/firmware/ath10k/QCA9888/hw2.0/firmware-5.bin

22
patches/lede/0058-ar71xx-C58-C59-fix-LAN1-working-incorrectly.patch Normal file
View File

@ -0,0 +1,22 @@
From: David Bauer <mail@david-bauer.net>
Date: Mon, 27 Nov 2017 04:19:38 +0100
Subject: ar71xx: C58/C59 fix LAN1 working incorrectly
This commit fixes LAN Port 1 not transferring data in case no
other LAN Port has active link-state on TP-Link Archer C58/C59.
Signed-off-by: David Bauer <mail@david-bauer.net>
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c
index f385d4a5a3148b83ee01007145e0eda2c0ef670f..129aa53f304dd1a118ace9a2749855cb36f66cfc 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c
@@ -249,7 +249,7 @@ static void __init archer_c5x_v1_setup(void)
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
ath79_eth1_data.speed = SPEED_1000;
ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_switch_data.phy_poll_mask |= BIT(4);
+ ath79_switch_data.phy_poll_mask |= BIT(0);
ath79_switch_data.phy4_mii_en = 1;
ath79_register_eth(1);

17
patches/lede/0059-ar71xx-omit-VLAN-from-Archer-C58-C59-LAN-interface.patch Normal file
View File

@ -0,0 +1,17 @@
From: David Bauer <mail@david-bauer.net>
Date: Thu, 11 Jan 2018 21:23:30 +0100
Subject: ar71xx: omit VLAN from Archer C58/C59 LAN interface
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 57bc912aa5ede22a3fad4af6a1deb00c33f17cf8..1690172b5dfac1e1aa278c38c27ba64cfd61ade0 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -208,7 +208,7 @@ ar71xx_setup_interfaces()
archer-c58-v1|\
archer-c59-v1|\
rb-450g)
- ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
+ ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" \
"0@eth1" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
;;

64
patches/lede/0060-ar71xx-increase-kernel-partition-size-for-some-TP-Link-boards.patch Normal file
View File

@ -0,0 +1,64 @@
From: Henryk Heisig <hyniu@o2.pl>
Date: Fri, 27 Oct 2017 00:23:17 +0200
Subject: ar71xx: increase kernel partition size for some TP-Link boards
This patch increases kernel partition size and re-enables image
generation for below TP-Link boards:
- archer-c58-v1
- archer-c60-v1
- tl-wr902ac-v1
- tl-wr942n-v1
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
[commit message and title reworded]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk
index ed45866fcbe8d35af663799a91b09b5c8fd613bc..be7e846c88f9ebbb8a4e4840e690d7864386bf64 100644
--- a/target/linux/ar71xx/image/tp-link.mk
+++ b/target/linux/ar71xx/image/tp-link.mk
@@ -130,7 +130,7 @@ define Device/archer-c58-v1
IMAGES := sysupgrade.bin factory.bin
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
- MTDPARTS := spi0.0:64k(u-boot)ro,64k(mac)ro,1344k(kernel),6592k(rootfs),64k(tplink)ro,64k(art)ro,7936k@0x20000(firmware)
+ MTDPARTS := spi0.0:64k(u-boot)ro,64k(mac)ro,7936k(firmware),64k(tplink)ro,64k(art)ro
endef
TARGET_DEVICES += archer-c58-v1
@@ -160,7 +160,7 @@ define Device/archer-c60-v1
IMAGES := sysupgrade.bin factory.bin
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
- MTDPARTS := spi0.0:64k(u-boot)ro,64k(mac)ro,1344k(kernel),6592k(rootfs),64k(tplink)ro,64k(art)ro,7936k@0x20000(firmware)
+ MTDPARTS := spi0.0:64k(u-boot)ro,64k(mac)ro,7936k(firmware),64k(tplink)ro,64k(art)ro
endef
TARGET_DEVICES += archer-c60-v1
diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c
index 67e2c4475bbd468bd20915767a481711ae872a3a..11ff2e56e19ec3780f988baf7257810530165b23 100644
--- a/tools/firmware-utils/src/tplink-safeloader.c
+++ b/tools/firmware-utils/src/tplink-safeloader.c
@@ -400,8 +400,8 @@ static struct device_info boards[] = {
{"profile", 0x11700, 0x03900},
{"default-config", 0x15000, 0x04000},
{"user-config", 0x19000, 0x04000},
- {"os-image", 0x20000, 0x150000},
- {"file-system", 0x170000, 0x678000},
+ {"os-image", 0x20000, 0x180000},
+ {"file-system", 0x1a0000, 0x648000},
{"certyficate", 0x7e8000, 0x08000},
{"radio", 0x7f0000, 0x10000},
{NULL, 0, 0}
@@ -473,8 +473,8 @@ static struct device_info boards[] = {
{"profile", 0x11700, 0x03900},
{"default-config", 0x15000, 0x04000},
{"user-config", 0x19000, 0x04000},
- {"os-image", 0x20000, 0x150000},
- {"file-system", 0x170000, 0x678000},
+ {"os-image", 0x20000, 0x180000},
+ {"file-system", 0x1a0000, 0x648000},
{"certyficate", 0x7e8000, 0x08000},
{"radio", 0x7f0000, 0x10000},
{NULL, 0, 0}

12
targets/ar71xx-generic
View File

@ -192,6 +192,18 @@ device tp-link-archer-c25-v1 archer-c25-v1 # instability with 5GHz mesh in some
packages $ATH10K_PACKAGES_QCA9887
fi
if [ "$BROKEN" ]; then
device tp-link-archer-c58-v1 archer-c58-v1
fi
if [ "$BROKEN" ] || [ "$GLUON_WLAN_MESH" = '11s' ]; then
device tp-link-archer-c59-v1 archer-c59-v1
fi
if [ "$BROKEN" ]; then
device tp-link-archer-c60-v1 archer-c60-v1
fi
device tp-link-re450 re450
packages $ATH10K_PACKAGES
fi