62 lines
2.4 KiB
ReStructuredText
62 lines
2.4 KiB
ReStructuredText
Gluon 2020.1.1
|
|
==============
|
|
|
|
This is the first service release for the Gluon 2020.1.x line, fixing regressions reported by
|
|
the community.
|
|
|
|
Bugfixes
|
|
--------
|
|
|
|
- Fixed non-working LEDs on TP-Link Archer C5 v1 and Archer C7 v2 after an upgrade to Gluon 2020.1.
|
|
|
|
- Fixed an issue which leads to AVM FRITZ!WLAN Repeater 450E devices being stuck in failsafe mode
|
|
after an upgrade to Gluon 2020.1.
|
|
|
|
Other changes
|
|
-------------
|
|
|
|
- Linux kernel has been updated to 4.14.171
|
|
|
|
Known issues
|
|
------------
|
|
|
|
- Out of memory situations with high client count on ath9k.
|
|
(`#1768 <https://github.com/freifunk-gluon/gluon/issues/1768>`_)
|
|
|
|
- The integration of the BATMAN_V routing algorithm is incomplete.
|
|
|
|
- Mesh neighbors don't appear on the status page. (`#1726 <https://github.com/freifunk-gluon/gluon/issues/1726>`_)
|
|
|
|
Many tools have the BATMAN_IV metric hardcoded, these need to be updated to account for the new throughput
|
|
metric.
|
|
|
|
- Throughput values are not correctly acquired for different interface types.
|
|
(`#1728 <https://github.com/freifunk-gluon/gluon/issues/1728>`_)
|
|
|
|
This affects virtual interface types like bridges and VXLAN.
|
|
|
|
- Default TX power on many Ubiquiti devices is too high, correct offsets are unknown
|
|
(`#94 <https://github.com/freifunk-gluon/gluon/issues/94>`_)
|
|
|
|
Reducing the TX power in the Advanced Settings is recommended.
|
|
|
|
- The MAC address of the WAN interface is modified even when Mesh-on-WAN is disabled
|
|
(`#496 <https://github.com/freifunk-gluon/gluon/issues/496>`_)
|
|
|
|
This may lead to issues in environments where a fixed MAC address is expected (like VMware when promiscuous mode is
|
|
disallowed).
|
|
|
|
- Inconsistent respondd API (`#522 <https://github.com/freifunk-gluon/gluon/issues/522>`_)
|
|
|
|
The current API is inconsistent and will be replaced eventually. The old API will still be supported for a while.
|
|
|
|
- Frequent reboots due to out-of-memory or high load due to memory pressure on weak hardware especially in larger
|
|
meshes (`#1243 <https://github.com/freifunk-gluon/gluon/issues/1243>`_)
|
|
|
|
Optimizations in Gluon 2018.1 have significantly improved memory usage.
|
|
There are still known bugs leading to unreasonably high load that we hope to
|
|
solve in future releases.
|
|
|
|
- High chance of ending in a soft-bricked state for Ubiquiti EdgeRouter-X. Workaround is to
|
|
repeat initial installation using the serial console. (`#1937 <https://github.com/freifunk-gluon/gluon/issues/1937>`_)
|