90 lines
2.5 KiB
ReStructuredText
90 lines
2.5 KiB
ReStructuredText
Gluon 2018.2.3
|
|
==============
|
|
|
|
Added hardware support
|
|
~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
ar71xx-generic
|
|
^^^^^^^^^^^^^^
|
|
|
|
* TP-Link
|
|
|
|
- CPE210 v3
|
|
|
|
ar71xx-nand
|
|
^^^^^^^^^^^
|
|
|
|
* Aerohive
|
|
|
|
- HiveAP 121
|
|
|
|
mcp85xx-p1020
|
|
^^^^^^^^^^^^^
|
|
|
|
* Aerohive
|
|
|
|
- HiveAP 330
|
|
|
|
ramips-mt76x8
|
|
^^^^^^^^^^^^^
|
|
|
|
* TP-Link
|
|
|
|
- TL-MR3420 v5 [#noibss]_
|
|
|
|
.. [#noibss]
|
|
Device or target does not support AP+IBSS mode: This device or target will not be built
|
|
when *GLUON_WLAN_MESH* is set to ``ibss``.
|
|
|
|
|
|
Bugfixes
|
|
~~~~~~~~
|
|
|
|
* Fixes passwordless SSH access when gluon-authorized-keys was used without gluon-setup-mode. (`#1777 <https://github.com/freifunk-gluon/gluon/issues/1777>`_)
|
|
|
|
* Fixes ingress traffic shaping. A necessary kernel config value was not set. (`#1790 <https://github.com/freifunk-gluon/gluon/issues/1790>`_)
|
|
|
|
* Fixes the generation of the bootloader image for the AVM FRITZ!Box 4040. (`#1766 <https://github.com/freifunk-gluon/gluon/issues/1766>`_)
|
|
|
|
* Fixes the IBSS mesh on the GL.iNet AR750. The wrong driver/firmware package was previously selected. (`#1792 <https://github.com/freifunk-gluon/gluon/pull/1792>`_)
|
|
|
|
* Fixes the primary mac selection on the TP-Link Archer C25 v1. (`#1771 <https://github.com/freifunk-gluon/gluon/issues/1771>`_)
|
|
|
|
|
|
Other changes
|
|
~~~~~~~~~~~~~
|
|
|
|
* Linux kernel has been updated to either
|
|
|
|
- 4.9.188 (ar71xx, brcm2708, mpc85xx) or
|
|
- 4.14.137 (ipq40xx, ipq806x, mvebu, ramips, sunxi, x86).
|
|
|
|
|
|
Known issues
|
|
~~~~~~~~~~~~
|
|
|
|
* Default TX power on many Ubiquiti devices is too high, correct offsets are
|
|
unknown (`#94 <https://github.com/freifunk-gluon/gluon/issues/94>`_)
|
|
|
|
Reducing the TX power in the Advanced Settings is recommended.
|
|
|
|
* The MAC address of the WAN interface is modified even when Mesh-on-WAN is
|
|
disabled (`#496 <https://github.com/freifunk-gluon/gluon/issues/496>`_)
|
|
|
|
This may lead to issues in environments where a fixed MAC address is expected
|
|
(like VMware when promiscuous mode is disallowed).
|
|
|
|
* Inconsistent respondd API
|
|
(`#522 <https://github.com/freifunk-gluon/gluon/issues/522>`_)
|
|
|
|
The current API is inconsistent and will be replaced eventually. The old API
|
|
will still be supported for a while.
|
|
|
|
* Frequent reboots due to out-of-memory or high load due to memory pressure on
|
|
weak hardware especially in larger meshes
|
|
(`#1243 <https://github.com/freifunk-gluon/gluon/issues/1243>`_)
|
|
|
|
Optimizations in Gluon 2018.1 have significantly improved memory usage.
|
|
There are still known bugs leading to unreasonably high load that we hope to
|
|
solve in future releases.
|