Commit Graph

354 Commits

Author SHA1 Message Date
Matthias Schiffer adda317176
build: set GLUON_DEPRECATED = 0 by default
We currently don't have any deprecated devices, so it doesn't make much
sense to force every site to specify this variable. Make it default to 0
instead.
2021-12-31 14:44:47 +01:00
Matthias Schiffer efb4a4f637
docs: user/getting_started: add a footnote regarding `make update`
Add some explanation when `make update` needs to be run again.
2021-12-31 02:50:23 +01:00
Matthias Schiffer ac3ac29158
docs: minor grammer/wording fixes 2021-12-24 14:18:16 +01:00
Matthias Schiffer 854fef4e12
docs: consistently indent .rst files with 2 spaces
2 spaces is the most common indentation width used in the docs; adjust
the rest for consistency.

Also change .editorconfig accordingly.
2021-12-24 14:16:04 +01:00
Martin Weinelt 6728c4a103
Add helper to run a containerized build environment (#2292)
Using `make container` or, if you don't have automake/gmake on your host
system, `./scripts/container.sh` will build an image for the current
branch your are on and drop you into a shell running inside a container
using that image.

From there all tooling required to work on Gluon is available.

Supports both podman (preferred) and docker.
2021-12-21 21:40:27 +01:00
David Bauer 102a4b9350
ath79-generic: add support for Enterasys WS-AP3705i (#2332) 2021-11-01 00:38:36 +01:00
Manu.WTF 1eeca33c8d
ramips-mt7621: add support for Ubiquiti UniFi 6 Lite (#2310)
Hardware
--------
MediaTek MT7621AT
256M DDR3
32M SPI-NOR
MediaTek MT7603 2T2R 802.11n 2.4GHz
MediaTek MT7915 2T2R 802.11ax 5GHz

Not Working
-----------
 - Bluetooth (connected to UART3)

UART
----

UART is located in the lower left corner of the board. Pinout is

0 - 3V3 (don't connect)
1 - RX
2 - TX
3 - GND

Console is 115200 8N1.

Boot
----

1. Connect to the serial console and connect power.

2. Double-press ESC when prompted

3. Set the fdt address

   $ fdt addr $(fdtcontroladdr)

4. Remove the signature node from the control FDT

   $ fdt rm /signature

5. Transfer and boot the OpenWrt initramfs image to the device.
   Make sure to name the file C0A80114.img and have it reachable at
   192.168.1.1/24

   $ tftpboot; bootm

Installation
------------

1. Connect to the booted device at 192.168.1.20 using username/password
   "ubnt".

2. Update the bootloader environment.

   $ fw_setenv devmode TRUE
   $ fw_setenv boot_openwrt "fdt addr \$(fdtcontroladdr);
     fdt rm /signature; bootubnt"
   $ fw_setenv bootcmd "run boot_openwrt"

3. Transfer the OpenWrt sysupgrade image to the device using SCP.

4. Check the mtd partition number for bs / kernel0 / kernel1

   $ cat /proc/mtd

5. Set the bootselect flag to boot from kernel0

   $ dd if=/dev/zero bs=1 count=1 of=/dev/mtdblock4

6. Write the OpenWrt sysupgrade image to both kernel0 as well as kernel1

   $ dd if=openwrt.bin of=/dev/mtdblock6
   $ dd if=openwrt.bin of=/dev/mtdblock7

7. Reboot the device. It should boot into OpenWrt.
2021-09-15 00:44:34 +02:00
J. Burfeind 83d0e3274e
ath79-generic: add support for Onion Omega (#2306)
* ath79-generic: add support for Onion Omega

support was previously dropped in
commit 45c84a117b ("ar71xx: drop target")

* fixup! ath79-generic: add support for Onion Omega

* fixup! ath79-generic: add support for Onion Omega
2021-09-04 17:42:44 +02:00
Tom Herbers 794f4b2d3d
ramips-mt76x8: add support for GL.iNet microuter-N300 (#2303) 2021-09-04 17:42:16 +02:00
Björn Dobe a492e629f8
ipq40xx: add support for Aruba AP-303H / Instant ON AP11D (#2302)
- [x] must be flashable from vendor firmware
  - [ ] webinterface
  - [ ] tftp
  - [x] other: Console port available. Manufacturer specific cable required.
        Tutorial in OpenWRT commit message https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=c6e972c8772a628a1a2f2e5590d7c6f4acef9ab0
- [x] must support upgrade mechanism
  - [x] must have working sysupgrade
    - [x] must keep/forget configuration (if applicable)
      *think `sysupgrade [-n]` or `firstboot`*
  - [x] must have working autoupdate
        root@Aruba-AP-303H:~# lua -e 'print(require("platform_info").get_image_name())'
        aruba-ap-303h
- [x] reset/wps/phone button must return device into config mode
- [x] primary mac should match address on device label (or packaging) (https://gluon.readthedocs.io/en/latest/dev/hardware.html#notes)
- wired network
  - [x] should support all network ports on the device
  - [x] must have correct port assignment (WAN/LAN)
- wifi (if applicable)
  - [x] association with AP must be possible on all radios
  - [x] association with 802.11s mesh must be working on all radios
  - [x] ap/mesh mode must work in parallel on all radios
- led mapping
  - power/sys led (_critical, because led definitions are setup on firstboot only_)
    - [x] lit while the device is on
    - [x] should display config mode blink sequence
(https://gluon.readthedocs.io/en/latest/features/configmode.html)
  - radio leds
    - [x] should map to their respective radio
    - [x] should show activity
  - switchport leds
    - [x] should map to their respective port (or switch, if only one led present)
    - [x] should show link state and activity
- outdoor devices only
  - [ ] added board name to `is_outdoor_device` function in `package/gluon-core/luasrc/usr/lib/lua/gluon/platform.lua`
- ToDo (upstream):
  - enable PoE pass through on interface E3
        system.poe_passthrough=gpio_switch
        system.poe_passthrough.name='PoE Passthrough'
        system.poe_passthrough.gpio_pin='446'
        system.poe_passthrough.value='0' (0 is active)
2021-09-01 23:31:01 +02:00
Tom Herbers 5a034be6b3
ath79-generic: add support for TP-Link EAP225-Outdoor v1 2021-08-28 18:52:52 +02:00
citronalco 34fc9544b8
ath79-generic: add support for TP-Link WBS210 v2 (#2299) 2021-08-27 23:15:04 +02:00
micw a1b961994a
Add support for tp-link CPE510 V2 (#2287)
Co-authored-by: Michael Wyraz <michael.wyraz@evermind.de>
2021-08-12 17:14:38 +02:00
Martin Weinelt e4086446cc
Use python3 in CI and documented build requirements
This has become possible with OpenWrt 21.02 and while the Dockerfile
already received that updated, we forgot to update the CI and the
documentation.
2021-08-12 01:27:50 +02:00
micw 6b699f376c
Add support for tp-link CPE510 V3 (#2283) 2021-08-11 19:15:37 +02:00
Matthias Schiffer df06b05b2a
Merge pull request #2288 from freifunk-gluon/wdr3600
ath79-generic: add TP-Link TL-WDR3600/4300
2021-08-11 07:56:07 +02:00
David Bauer 14b1224f97
ipq40xx: add support for Aruba AP-365 / InstantOn AP17 (#2290) 2021-08-11 01:14:30 +02:00
Matthias Schiffer 4d21d4134e
ath79-generic: add support for TP-Link TL-WDR3600/4300 v1 2021-08-08 11:21:06 +02:00
David Bauer d3d22ba677
ath79-generic: add support for Joy-IT JT-OR750i (#2282) 2021-07-30 20:16:34 +02:00
Steffen Förster 9fb00d137b
ramips-mt76x8: add support for TP-Link RE200 v2 (#2275)
TP-Link RE200 v2 is a wireless range extender with Ethernet and 2.4G and 5G
WiFi with internal antennas. It's based on MediaTek MT7628AN+MT7610EN.

Specifications
--------------

- MediaTek MT7628AN (580 Mhz)
- 64 MB of RAM
- 8 MB of FLASH
- 2T2R 2.4 GHz and 1T1R 5 GHz
- 1x 10/100 Mbps Ethernet
- UART header on PCB (57600 8n1)
- 8x LED (GPIO-controlled), 2x button

There are 2.4G and 5G LEDs in red and green which are controlled
separately.

MAC addresses
-------------

The MAC address assignment matches stock firmware, i.e.:
LAN : *:0D
2.4G: *:0E
5G  : *:0F

Installation
------------

Web Interface
-------------

It is possible to upgrade to OpenWrt via the web interface. Simply flash
the -factory.bin from OEM. In contrast to a stock firmware, this will not
overwrite U-Boot.
2021-07-29 08:34:51 +02:00
David Bauer 9fa45ac489
ramips-mt76x8: add support for RAVPower RP-WD009 (#2265) 2021-07-18 16:41:27 +02:00
Matthias Schiffer 09c9b78e30 ramips-rt305x: drop target
VoCores aren't exactly useful mesh nodes except for experimentation.
They certainly aren't worth maintaining a whole target, in particular
one that has a WLAN driver not used by any other target.
2021-07-13 21:37:39 +02:00
David Bauer 99c13423fc ath79-generic: add support for Siemens WS-AP3610 2021-07-06 19:20:17 +02:00
Martin Weinelt 1b620c831b
Merge pull request #2250 from blocktrron/pr-nanopi-r2s 2021-06-30 22:01:54 +02:00
David Bauer 969d406427
Merge pull request #2252 from blocktrron/pr-docs-a5-v11
docs: remove dropped hardware from docs
2021-06-30 19:16:18 +02:00
David Bauer ab4c99842a
Merge pull request #2255 from blocktrron/pr-u6-lr
mediatek-mt7622: add support for UniFi 6 LR
2021-06-29 23:32:36 +02:00
David Bauer 4e00f1f62c
Merge pull request #2254 from Dark4MD/new-device-mi4a-gigabit
ramips-mt7621: add Xiaomi Mi Router 4A (Gigabit Edition)
2021-06-29 23:32:29 +02:00
David Bauer 3d94a09e96 mediatek-mt7622: add support for Ubiquiti UniFi 6 LR
Signed-off-by: David Bauer <mail@david-bauer.net>
2021-06-29 22:23:05 +02:00
Dark4MD aab7d8aca9 ramips-mt76x8: add Xiaomi Mi Router 4C
Specifications:

- CPU: MediaTek MT7628AN (580MHz)
- Flash: 16MB
- RAM: 64MB DDR2
- 2.4 GHz: IEEE 802.11b/g/n with Integrated LNA and PA
- Antennas: 4x external single band antennas
- WAN: 1x 10/100M
- LAN: 2x 10/100M
- LEDs: 2x yellow/blue. Programmable (labelled as power on case)
                      - Non-programmable (shows WAN activity)
- Button: Reset

How to install:

1- Use OpenWRTInvasion to gain telnet and ftp access.
2- Push openwrt firmware to /tmp/ using ftp.
3- Connect to router using telnet. (IP: 192.168.31.1 -
   Username: root - No password)
4- Use command "mtd -r write /tmp/firmware.bin OS1" to flash into
   the router..
5- It takes around 2 minutes. After that router will restart itself
   to OpenWrt.
2021-06-29 11:04:11 +02:00
Dark4MD a5e085b57c ramips-mt7621: add Xiaomi Mi Router 4A (Gigabit Edition)
Specifications:

- SoC:      MediaTek MT7621
- Flash:    16 MiB NOR SPI
- RAM:      128 MiB DDR3
- Ethernet: 3x 10/100/1000 Mbps (switched, 2xLAN + WAN)
- WIFI0:    MT7603E 2.4GHz 802.11b/g/n
- WIFI1:    MT7612E 5GHz 802.11ac
- Antennas: 4x external (2 per radio), non-detachable
- LEDs:     Programmable "power" LED (two-coloured, yellow/blue)
            Non-programmable "internet" LED (shows WAN activity)
- Buttons:  Reset

Installation:

Bootloader won't accept any serial input unless "boot_wait" u-boot
environment variable is changed to "on".

Vendor firmware won't accept any serial input until "uart_en" is
set to "1".

Using the https://github.com/acecilia/OpenWRTInvasion exploit you
can gain access to shell to enable these options:

To enable uart keyboard actions - 'nvram set uart_en=1'
To make uboot delay boot work - 'nvram set boot_wait=on'
Set boot delay to 5 - 'nvram set bootdelay=5'

Then run 'nvram commit' to make the changes permanent.

Once in the shell (following the OpenWRTInvasion instructions) you
can then run the following to flash OpenWrt and then reboot:

'cd /tmp; curl https://downloads.openwrt.org/...-sysupgrade.bin
  --output firmware.bin; mtd -e OS1 -r write firmware.bin OS1'
2021-06-29 11:02:15 +02:00
David Bauer c8b1999780 docs: remove dropped hardware from docs
Fixes commit 89dc6b203d ("ramips-rt305x: drop devices with insufficient flash")

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-06-29 00:47:17 +02:00
David Bauer ded4b8a711 rockchip-armv8: add FriendlyARM NanoPi R2S 2021-06-29 00:25:09 +02:00
David Bauer f16061e021 docs: replace ar71xx occurences with ath79
Replace occurences of ar71xx with ath79. Remove references of ar71xx
targets which are not relevant anymore.
2021-06-26 02:20:08 +02:00
David Bauer 003c90f0b2 docs: drop ar71xx targets from supported devices 2021-06-26 02:14:59 +02:00
David Bauer 2aa6f90bb3 docs contrib: add dependency on qemu-utils 2021-06-22 01:59:48 +02:00
David Bauer bed66fa248 ath79: move GL.iNet GL-AR750S to NAND subtarget 2021-06-22 01:59:48 +02:00
Dark4MD 0b00ed9193 ramips-mt76x8: add Xiaomi Mi Router 4A (100M Edition) 2021-06-15 20:12:35 +02:00
Martin Weinelt 187386cb79
README, docs: Gluon v2021.1 2021-06-10 23:20:56 +02:00
David Bauer 5f3bb758b3
Merge pull request #2154 from yanosz/patch-1
Mention names of opkg-keys in doc
2021-04-28 00:20:02 +02:00
yanosz 96dfbc46c0
docs: Document location and handling of opkg keypair
Co-Authored-By: Martin Weinelt <martin@darmstadt.freifunk.net>
2021-04-28 00:18:31 +02:00
Martin Weinelt a2be901803
docs: Add v2020.2.3 release notes 2021-04-14 02:10:15 +02:00
Sven Eckelmann 50537e5474 ipq40xx: add support for Plasma Cloud PA2200
This device is a dual 5GHz device. It is recommended to manually change the
radio of the first device to the lower 5GHz channels and the second radio
to the upper 5GHz channels
2021-01-13 08:28:12 +01:00
Sven Eckelmann 17baf0f415 ipq40xx: add support for Plasma Cloud PA1200 2021-01-13 08:28:12 +01:00
David Bauer db9768310a
Merge pull request #2153 from FreifunkVogtland/pa300
ath79: Add support for Plasma Cloud PA300(E)
2021-01-12 15:22:03 +01:00
Sven Eckelmann 6e2faecb4e ath79: add support for Plasma Cloud PA300E 2021-01-10 09:06:02 +01:00
Sven Eckelmann a9039229d6 ath79: add support for Plasma Cloud PA300 2021-01-10 09:05:58 +01:00
Andreas Ziegler b84c58c0b5
docs: add v2020.2.2 release notes 2020-12-11 04:13:20 +01:00
Martin Weinelt a4760320d7
docs: reference weather radar map for europe for outdoor_chanlist
The map is generated from EUMETNET data, it's source code can be
found at https://gitlab.com/aaaaalbert/wxr-channel-map.
2020-11-14 18:33:02 +01:00
David Bauer e5b89b5511
ipq40xx-generic: add support for AVM FRITZBox 7530 (#2125) 2020-10-06 23:37:41 +02:00
David Bauer 177ff68ccf
ar71xx-generic: only create manifest alias for Rocket M5 (#2127)
* ar71xx-generic: only create manifest alias for Rocket M5

This follow up the discussion done in #2070 by not  creating a symlink
for the Rocket M5. Images for the Rocket M2 can still be flashed on a
Rocket M5.

This change will prevent the Rocket M5 from appearing in Firmware
selectors. Existing devices will still receive updates, as the device
name is still referenced for the device name expected by the M5.

Closes #2070

* docs: remove Rocket M5 from supported devices
2020-10-06 19:16:56 +02:00