From 5648faf82d9437ef913bc2e7df97c928e0b60bdc Mon Sep 17 00:00:00 2001 From: Ruben Barkow Date: Sun, 15 Jul 2018 02:33:48 +0200 Subject: [PATCH] Enhance example translation files --- docs/site-example/i18n/de.po | 58 ++++++++++++++++++++++++---------- docs/site-example/i18n/en.po | 61 +++++++++++++++++++++++++----------- docs/site-example/i18n/fr.po | 27 +++++++++------- 3 files changed, 100 insertions(+), 46 deletions(-) diff --git a/docs/site-example/i18n/de.po b/docs/site-example/i18n/de.po index 2d56ceed..51b8e71c 100644 --- a/docs/site-example/i18n/de.po +++ b/docs/site-example/i18n/de.po @@ -28,35 +28,61 @@ msgstr "" msgid "gluon-config-mode:pubkey" msgstr "" "

Dies ist der öffentliche Schlüssel deines Freifunk-Knotens. Erst nachdem " -"er auf den Servern des Freifunk-Projektes auf Alpha Centauri eingetragen wurde, " -"kann sich dein Knoten mit dem Mesh-VPN dort verbinden. Bitte " -"schicke dazu diesen Schlüssel und den Namen deines Knotens " +"er auf den Servern des Freifunk-Projektes auf Alpha Centauri eingetragen " +"wurde, kann sich dein Knoten mit dem Mesh-VPN dort verbinden. Bitte schicke " +"dazu diesen Schlüssel und den Namen deines Knotens " "(<%=pcdata(hostname)%>) an " -"&" -"body=<%= urlencode('# ' .. hostname .. '\n' .. pubkey) %>\">keys@alpha-centauri.freifunk.net." +"&body=" +"<%= urlencode('# ' .. hostname .. '\n# ' .. sysconfig.primary_mac .. '\nkey ') %>" +"%22<%= pubkey %>%22;" +"<%= urlencode('\n\nIch habe zur Kenntnis genommen, dass der im ') %>" +"<%= urlencode('Knoten von mir eingetragene Kontakt im Meshnetz ') %>" +"<%= urlencode('öffentlich abfragbar ist und von beliebigen Diensten ') %>" +"<%= urlencode('(z.B. der Freifunk-Karte) veröffentlicht werden kann.') %>" +"<%= urlencode('\n\nGruß, \n\n') %>" +"\">keys@alpha-centauri.freifunk.net. Deine E-Mail Adresse wird " +"selbstverständlich vertraulich behandelt und nicht weitergegeben." "

" "
" -" # <%= pcdata(hostname) %>" -"
" +"# <%= pcdata(hostname) %>
" "<%= pubkey %>" "
" +"

Dein Knoten startet gerade neu und wird anschließend versuchen, sich mit " +"anderen Freifunkknoten in seiner Nähe über WLAN sowie über deine" +"Internetverbindung über das VPN-Gateway zu verbinden.

" +"

Vergiss nicht das Netzwerkkabel vom LAN Port in den WAN Port " +"umzustecken.

" msgid "gluon-config-mode:novpn" msgstr "" -"

Du hast ausgewählt, kein Mesh-VPN " -"zu nutzen. Dein Knoten kann also nur dann eine Verbindung zum Freifunk-Netz " -"aufbauen, wenn andere Freifunk-Router in WLAN-Reichweite sind." -"

" +"

Du hast ausgewählt die Internetverbindung (Mesh-VPN) nicht zu " +"nutzen. Dein Knoten kann also nur dann eine Verbindung zum " +"Freifunk-Netz aufbauen, wenn andere Freifunk-Knoten in WLAN-Reichweite sind." +"

Bitte schicke uns eine E-Mail mit dem Namen deines Knotens " +"(<%= pcdata(hostname) %>) und ein paar Informationen an &" +"body=<%= urlencode('# ' .. hostname .. '\n# ' .. sysconfig.primary_mac .. '\n# kein mesh-VPN') %>" +"<%= urlencode('\n\nIch habe zur Kenntnis genommen, dass der im ') %>" +"<%= urlencode('Knoten von mir eingetragene Kontakt im Meshnetz ') %>" +"<%= urlencode('öffentlich abfragbar ist und von beliebigen Diensten ') %>" +"<%= urlencode('(z.B. der Freifunk-Karte) veröffentlicht werden kann.') %>" +"<%= urlencode('\n\nGruß, \n\n') %>" +"\">kontakt@alpha-centauri.freifunk.net. Deine E-Mail Adresse wird " +"selbstverständlich vertraulich behandelt und nicht weitergegeben.

" +"

Dein Knoten <%= pcdata(hostname) %> startet gerade neu und wird " +"anschließend versuchen, sich mit anderen Freifunkknoten in seiner Nähe über " +"WLAN zu verbinden.

" msgid "gluon-config-mode:reboot" msgstr "" -"

Dein Knoten <%= pcdata(hostname) %> startet gerade neu und wird " -"anschließend versuchen, sich mit anderen Freifunkknoten in seiner Nähe zu " -"verbinden. Weitere Informationen zur " +"

Weitere Informationen zur " "Alpha Centauri Freifunk-Community findest du auf " -"unserer Webseite.

" +"unserer " +"Webseite.

" "

Um zu dieser Konfigurationsseite zurückzugelangen, drücke im normalen " -"Betrieb für drei Sekunden den Reset-Button. Das Gerät wird dann im Config " +"Betrieb für ca. 10 Sekunden den Reset-Button. Das Gerät wird dann im Config " "Mode neustarten.

" "

Viel Spaß mit deinem Knoten und der Erkundung von Freifunk!

" diff --git a/docs/site-example/i18n/en.po b/docs/site-example/i18n/en.po index 23f1c77d..eef8bd08 100644 --- a/docs/site-example/i18n/en.po +++ b/docs/site-example/i18n/en.po @@ -12,8 +12,8 @@ msgstr "" msgid "gluon-config-mode:welcome" msgstr "" -"Welcome to the setup wizard of your new Freifunk Alpha Centauri node. " -"Please fill out the following form and submit it." +"Welcome to the setup wizard of your new Freifunk Alpha Centauri node. Please " +"fill out the following form and submit it." msgid "gluon-config-mode:domain" msgstr "Domain" @@ -22,37 +22,62 @@ msgid "gluon-config-mode:domain-select" msgstr "" "Here you have the possibility of selecting the mesh domain in which your node " "is placed. Please keep in mind that your router only connects with the nodes " -"of the selected domain" +"of the selected domain." msgid "gluon-config-mode:pubkey" msgstr "" "

This is your Freifunk node's public key. The node won't be able to " -"connect to the mesh VPN until the key has been registered on the Freifunk servers. " -"To register, send the key together with your node's name (<%=pcdata(hostname)%>) to " -"&" -"body=<%= urlencode('# ' .. hostname .. '\n' .. pubkey) %>\">keys@alpha-centauri.freifunk.net." -"

" +"connect to the mesh VPN until the key has been registered on the Freifunk " +"servers. To register, send the key together with your node's name " +"(<%=pcdata(hostname)%>) to " +"&body=" +"<%= urlencode('# ' .. hostname .. '\n# ' .. sysconfig.primary_mac .. '\nkey ') %>" +"%22<%= pubkey %>%22;" +"<%= urlencode('\n\nI have taken note that the contact I entered in the ') %>" +"<%= urlencode('node is publicly available on the Internet and can be ') %>" +"<%= urlencode('used by any services (e.g. the meshviewer map).') %>" +"<%= urlencode('\n\nThanks, \n\n') %>" +"\">keys@alpha-centauri.freifunk.net. Of course, your e-mail address will " +"be treated confidentially and will not be passed on.

" "
" -" # <%= pcdata(hostname) %>" -"
" +" # <%= pcdata(hostname) %>
" "<%= pubkey %>" "
" +"

Your node <%= pcdata(hostname) %> is currently rebooting and will " +"try to connect to other nearby Freifunk nodes via WLAN and to a VPN-gateway " +"via your internet connection after the reboot is finished.

" +"

Don't forget to plug the network cable from the LAN port to the WAN port." +"

" msgid "gluon-config-mode:novpn" msgstr "" "

You have selected not to use the mesh VPN. " -"Your node will only be able to connect to the Freifunk network if other nodes in reach " -"already have a connection.

" +"Your node will only be able to connect to the Freifunk network if other nodes " +"in reach already have a connection.

" +"Please send an e-mail with the name of your node " +"(<%=pcdata(hostname)%>) and some additional information to " +"&body=" +"<%= urlencode('# ' .. hostname .. '\n# ' .. sysconfig.primary_mac .. '\nkey ') %>" +"%22<%= pubkey %>%22;" +"<%= urlencode('\n\nI have taken note that the contact I entered in the ') %>" +"<%= urlencode('node is publicly available on the Internet and can be ') %>" +"<%= urlencode('used by any services (e.g. the meshviewer map).') %>" +"<%= urlencode('\n\nThanks, \n\n') %>" +"\">keys@alpha-centauri.freifunk.net. Of course, your e-mail address will " +"be treated confidentially and will not be passed on.

" +"

Your node <%= pcdata(hostname) %> is currently rebooting and will " +"try to connect to other nearby Freifunk nodes after that.

" msgid "gluon-config-mode:reboot" msgstr "" -"

Your node <%= pcdata(hostname) %> is currently rebooting and will " -"try to connect to other nearby Freifunk nodes after that. For more " -"information about the Freifunk community on Alpha Centauri, have a look at " -"our homepage.

" +"

For more information about the Freifunk community on Alpha Centauri, have a " +"look at our " +"homepage.

" "

To get back to this configuration interface, press the reset button for " -"3 seconds during normal operation. The device will then reboot into config " -"mode.

" +"about 10 seconds during normal operation. The device will then reboot into " +"config mode.

" "

Have fun with your node and exploring of the Freifunk network!

" # Leave empty to use the default text, which can be found in: diff --git a/docs/site-example/i18n/fr.po b/docs/site-example/i18n/fr.po index f3fd4efa..ba0f43a4 100644 --- a/docs/site-example/i18n/fr.po +++ b/docs/site-example/i18n/fr.po @@ -14,27 +14,29 @@ msgid "gluon-config-mode:welcome" msgstr "" "Bienvenue dans l'assistant de configuration pour votre nouveau nœud " "Freifunk. Remplissez le formulaire suivant en fonction de vos besoins " -"et enregistrez le" +"et enregistrez le." msgid "gluon-config-mode:domain" msgstr "Domaine" msgid "gluon-config-mode:domain-select" -msgstr "" +msgstr "Ici, vous avez la possibilité de sélectionner le domaine dans lequel " +"se trouve votre nœud. N'oubliez pas que votre nœud ne peut se connecter " +"qu'aux nœuds du domaine sélectionné." msgid "gluon-config-mode:pubkey" msgstr "" -"

Ceci est la clé publique de votre nœud Freifunk. Seulment après que la clé soit " -"entrée sur les serveurs de votre groupe de Freifunk votre nœud pourra se connecter " -"sur les serveur Mesh-VPN de votre groupe Freifunk. Veuillez envoyer la clé avec le " -"nom de votre nœud " +"

Ceci est la clé publique de votre nœud Freifunk. Seulment après que la clé " +"soit entrée sur les serveurs de votre groupe de Freifunk votre nœud pourra se " +"connecter sur les serveur Mesh-VPN de votre groupe Freifunk. Veuillez envoyer " +"la clé avec le nom de votre nœud " "(<%=pcdata(hostname)%>) à " -"&" +"&" "body=<%= urlencode('# ' .. hostname .. '\n' .. pubkey) %>\">keys@alpha-centauri.freifunk.net." "

" "
" -" # <%= pcdata(hostname) %>" -"
" +" # <%= pcdata(hostname) %>
" "<%= pubkey %>" "
" @@ -49,10 +51,11 @@ msgstr "" "

Votre nœud <%= pcdata(hostname) %> es en train de redémarrer et " "va ensuite éssayer de se connecter avec les autres nœuds du réseau Freifunk " "Vous pourrez trouver plus d'informations sur votre groupe Freifunk sur la page " -" de ton groupe .

" +" de ton " +"groupe .

" "

Pour retrouver cette page de configuration veuillier appuyez pendant le " -"fonctionement normal pendant 3 Secondes sur le bouton reset. L'appareil va ensuite " -"redémarer en mode configuration.

" +"fonctionement normal pendant 3 Secondes sur le bouton reset. L'appareil va " +"ensuite redémarer en mode configuration.

" "

Profitez votre de nœud et amusez vous à découvrir le réseau Freifunk!

" # Leave empty to use the default text, which can be found in: