Add support for TP-LINK CPE210/220/510/520

This commit is contained in:
Matthias Schiffer 2014-11-26 19:58:35 +01:00
parent 6f14837b91
commit ab729ed307
4 changed files with 1049 additions and 0 deletions

View File

@ -0,0 +1,570 @@
From: Matthias Schiffer <mschiffer@universe-factory.net>
Date: Wed, 26 Nov 2014 19:57:39 +0100
Subject: firmware-utils: add new tool tplink-safeloader for the new TP-LINK Pharos devices (CPE210/220/510/520)
The new TP-LINK Pharos series uses a new bootloader, the "TP-LINK Safeloader".
It uses an advanced firmware image format, containing an image partition table
and a flash partition table (and image partitions are mapped to the
corresponding flash partitions). The exact image format is documented in the
source code.
Furthermore, the bootloader expects the kernel image as an ELF executable.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
diff --git a/tools/firmware-utils/Makefile b/tools/firmware-utils/Makefile
index 4bb53cb..3f9eb56 100644
--- a/tools/firmware-utils/Makefile
+++ b/tools/firmware-utils/Makefile
@@ -41,6 +41,7 @@ define Host/Compile
$(call cc,mkplanexfw sha1)
$(call cc,mktplinkfw md5)
$(call cc,mktplinkfw2 md5)
+ $(call cc,tplink-safeloader md5, -Wall)
$(call cc,pc1crypt)
$(call cc,osbridge-crc)
$(call cc,wrt400n cyg_crc32)
diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c
new file mode 100644
index 0000000..23d703f
--- /dev/null
+++ b/tools/firmware-utils/src/tplink-safeloader.c
@@ -0,0 +1,538 @@
+/*
+ Copyright (c) 2014, Matthias Schiffer <mschiffer@universe-factory.net>
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the following disclaimer in the documentation
+ and/or other materials provided with the distribution.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+
+/*
+ tplink-safeloader
+
+ Image generation tool for the TP-LINK SafeLoader as seen on
+ TP-LINK Pharos devices (CPE210/220/510/520)
+*/
+
+
+#include <assert.h>
+#include <errno.h>
+#include <error.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <string.h>
+#include <time.h>
+#include <unistd.h>
+
+#include <arpa/inet.h>
+
+#include <sys/types.h>
+#include <sys/stat.h>
+
+#include "md5.h"
+
+
+#define ALIGN(x,a) ({ typeof(a) __a = (a); (((x) + __a - 1) & ~(__a - 1)); })
+
+
+/** An image partition table entry */
+struct image_partition_entry {
+ const char *name;
+ size_t size;
+ uint8_t *data;
+};
+
+/** A flash partition table entry */
+struct flash_partition_entry {
+ const char *name;
+ uint32_t base;
+ uint32_t size;
+};
+
+
+/** The content of the soft-version structure */
+struct __attribute__((__packed__)) soft_version {
+ uint32_t magic;
+ uint32_t zero;
+ uint8_t pad1;
+ uint8_t version_major;
+ uint8_t version_minor;
+ uint8_t version_patch;
+ uint8_t year_hi;
+ uint8_t year_lo;
+ uint8_t month;
+ uint8_t day;
+ uint32_t rev;
+ uint8_t pad2;
+};
+
+
+static const uint8_t jffs2_eof_mark[4] = {0xde, 0xad, 0xc0, 0xde};
+
+
+/**
+ Salt for the MD5 hash
+
+ Fortunately, TP-LINK seems to use the same salt for most devices which use
+ the new image format.
+*/
+static const uint8_t md5_salt[16] = {
+ 0x7a, 0x2b, 0x15, 0xed,
+ 0x9b, 0x98, 0x59, 0x6d,
+ 0xe5, 0x04, 0xab, 0x44,
+ 0xac, 0x2a, 0x9f, 0x4e,
+};
+
+
+/** Vendor information for CPE210/220/510/520 */
+static const unsigned char cpe510_vendor[] = "\x00\x00\x00\x1f""CPE510(TP-LINK|UN|N300-5):1.0\r\n";
+
+
+/**
+ The flash partition table for CPE210/220/510/520;
+ it is the same as the one used by the stock images.
+*/
+static const struct flash_partition_entry cpe510_partitions[] = {
+ {"fs-uboot", 0x00000, 0x20000},
+ {"partition-table", 0x20000, 0x02000},
+ {"default-mac", 0x30000, 0x00020},
+ {"product-info", 0x31100, 0x00100},
+ {"signature", 0x32000, 0x00400},
+ {"os-image", 0x40000, 0x170000},
+ {"soft-version", 0x1b0000, 0x00100},
+ {"support-list", 0x1b1000, 0x00400},
+ {"file-system", 0x1c0000, 0x600000},
+ {"user-config", 0x7c0000, 0x10000},
+ {"default-config", 0x7d0000, 0x10000},
+ {"log", 0x7e0000, 0x10000},
+ {"radio", 0x7f0000, 0x10000},
+ {NULL, 0, 0}
+};
+
+/**
+ The support list for CPE210/220/510/520
+
+ The stock images also contain strings for two more devices: BS510 and BS210.
+ At the moment, there exists no public information about these devices.
+*/
+static const unsigned char cpe510_support_list[] =
+ "\x00\x00\x00\xc8\x00\x00\x00\x00"
+ "SupportList:\r\n"
+ "CPE510(TP-LINK|UN|N300-5):1.0\r\n"
+ "CPE520(TP-LINK|UN|N300-5):1.0\r\n"
+ "CPE210(TP-LINK|UN|N300-2):1.0\r\n"
+ "CPE220(TP-LINK|UN|N300-2):1.0\r\n"
+ "\r\n\xff";
+
+
+/** Allocates a new image partition */
+struct image_partition_entry alloc_image_partition(const char *name, size_t len) {
+ struct image_partition_entry entry = {name, len, malloc(len)};
+ if (!entry.data)
+ error(1, errno, "malloc");
+
+ return entry;
+}
+
+/** Frees an image partition */
+void free_image_partition(struct image_partition_entry entry) {
+ free(entry.data);
+}
+
+/** Generates the partition-table partition */
+struct image_partition_entry make_partition_table(const struct flash_partition_entry *p) {
+ struct image_partition_entry entry = alloc_image_partition("partition-table", 0x800);
+
+ char *s = (char *)entry.data, *end = (char *)(s+entry.size);
+
+ *(s++) = 0x00;
+ *(s++) = 0x04;
+ *(s++) = 0x00;
+ *(s++) = 0x00;
+
+ size_t i;
+ for (i = 0; p[i].name; i++) {
+ size_t len = end-s;
+ size_t w = snprintf(s, len, "partition %s base 0x%05x size 0x%05x\n", p[i].name, p[i].base, p[i].size);
+
+ if (w > len-1)
+ error(1, 0, "flash partition table overflow?");
+
+ s += w;
+ }
+
+ s++;
+
+ memset(s, 0xff, end-s);
+
+ return entry;
+}
+
+
+/** Generates a binary-coded decimal representation of an integer in the range [0, 99] */
+static inline uint8_t bcd(uint8_t v) {
+ return 0x10 * (v/10) + v%10;
+}
+
+
+/** Generates the soft-version partition */
+struct image_partition_entry make_soft_version(uint32_t rev) {
+ struct image_partition_entry entry = alloc_image_partition("soft-version", sizeof(struct soft_version));
+ struct soft_version *s = (struct soft_version *)entry.data;
+
+ time_t t;
+ if (time(&t) == (time_t)(-1))
+ error(1, errno, "time");
+
+ struct tm *tm = localtime(&t);
+
+ s->magic = htonl(0x0000000c);
+ s->zero = 0;
+ s->pad1 = 0xff;
+
+ s->version_major = 0;
+ s->version_minor = 0;
+ s->version_patch = 0;
+
+ s->year_hi = bcd((1900+tm->tm_year)/100);
+ s->year_lo = bcd(tm->tm_year%100);
+ s->month = bcd(tm->tm_mon+1);
+ s->day = bcd(tm->tm_mday);
+ s->rev = htonl(rev);
+
+ s->pad2 = 0xff;
+
+ return entry;
+}
+
+/** Generates the support-list partition */
+struct image_partition_entry make_support_list(const unsigned char *support_list, size_t len) {
+ struct image_partition_entry entry = alloc_image_partition("support-list", len);
+ memcpy(entry.data, support_list, len);
+ return entry;
+}
+
+/** Creates a new image partition with an arbitrary name from a file */
+struct image_partition_entry read_file(const char *part_name, const char *filename, bool add_jffs2_eof) {
+ struct stat statbuf;
+
+ if (stat(filename, &statbuf) < 0)
+ error(1, errno, "unable to stat file `%s'", filename);
+
+ size_t len = statbuf.st_size;
+
+ if (add_jffs2_eof)
+ len = ALIGN(len, 0x10000) + sizeof(jffs2_eof_mark);
+
+ struct image_partition_entry entry = alloc_image_partition(part_name, len);
+
+ FILE *file = fopen(filename, "rb");
+ if (!file)
+ error(1, errno, "unable to open file `%s'", filename);
+
+ if (fread(entry.data, statbuf.st_size, 1, file) != 1)
+ error(1, errno, "unable to read file `%s'", filename);
+
+ if (add_jffs2_eof) {
+ uint8_t *eof = entry.data + statbuf.st_size, *end = entry.data+entry.size;
+
+ memset(eof, 0xff, end - eof - sizeof(jffs2_eof_mark));
+ memcpy(end - sizeof(jffs2_eof_mark), jffs2_eof_mark, sizeof(jffs2_eof_mark));
+ }
+
+ fclose(file);
+
+ return entry;
+}
+
+
+/**
+ Copies a list of image partitions into an image buffer and generates the image partition table while doing so
+
+ Example image partition table:
+
+ fwup-ptn partition-table base 0x00800 size 0x00800
+ fwup-ptn os-image base 0x01000 size 0x113b45
+ fwup-ptn file-system base 0x114b45 size 0x1d0004
+ fwup-ptn support-list base 0x2e4b49 size 0x000d1
+
+ Each line of the partition table is terminated with the bytes 09 0d 0a ("\t\r\n"),
+ the end of the partition table is marked with a zero byte.
+
+ The firmware image must contain at least the partition-table and support-list partitions
+ to be accepted. There aren't any alignment constraints for the image partitions.
+
+ The partition-table partition contains the actual flash layout; partitions
+ from the image partition table are mapped to the corresponding flash partitions during
+ the firmware upgrade. The support-list partition contains a list of devices supported by
+ the firmware image.
+
+ The base offsets in the firmware partition table are relative to the end
+ of the vendor information block, so the partition-table partition will
+ actually start at offset 0x1814 of the image.
+
+ I think partition-table must be the first partition in the firmware image.
+*/
+void put_partitions(uint8_t *buffer, const struct image_partition_entry *parts) {
+ size_t i;
+ char *image_pt = (char *)buffer, *end = image_pt + 0x800;
+
+ size_t base = 0x800;
+ for (i = 0; parts[i].name; i++) {
+ memcpy(buffer + base, parts[i].data, parts[i].size);
+
+ size_t len = end-image_pt;
+ size_t w = snprintf(image_pt, len, "fwup-ptn %s base 0x%05x size 0x%05x\t\r\n", parts[i].name, (unsigned)base, (unsigned)parts[i].size);
+
+ if (w > len-1)
+ error(1, 0, "image partition table overflow?");
+
+ image_pt += w;
+
+ base += parts[i].size;
+ }
+
+ image_pt++;
+
+ memset(image_pt, 0xff, end-image_pt);
+}
+
+/** Generates and writes the image MD5 checksum */
+void put_md5(uint8_t *md5, uint8_t *buffer, unsigned int len) {
+ MD5_CTX ctx;
+
+ MD5_Init(&ctx);
+ MD5_Update(&ctx, md5_salt, (unsigned int)sizeof(md5_salt));
+ MD5_Update(&ctx, buffer, len);
+ MD5_Final(md5, &ctx);
+}
+
+
+/**
+ Generates the firmware image in factory format
+
+ Image format:
+
+ Bytes (hex) Usage
+ ----------- -----
+ 0000-0003 Image size (4 bytes, big endian)
+ 0004-0013 MD5 hash (hash of a 16 byte salt and the image data starting with byte 0x14)
+ 0014-1013 Vendor information (4096 bytes, padded with 0xff; there seem to be older
+ (VxWorks-based) TP-LINK devices which use a smaller vendor information block)
+ 1014-1813 Image partition table (2048 bytes, padded with 0xff)
+ 1814-xxxx Firmware partitions
+*/
+void * generate_factory_image(const unsigned char *vendor, size_t vendor_len, const struct image_partition_entry *parts, size_t *len) {
+ *len = 0x1814;
+
+ size_t i;
+ for (i = 0; parts[i].name; i++)
+ *len += parts[i].size;
+
+ uint8_t *image = malloc(*len);
+ if (!image)
+ error(1, errno, "malloc");
+
+ image[0] = *len >> 24;
+ image[1] = *len >> 16;
+ image[2] = *len >> 8;
+ image[3] = *len;
+
+ memcpy(image+0x14, vendor, vendor_len);
+ memset(image+0x14+vendor_len, 0xff, 4096-vendor_len);
+
+ put_partitions(image + 0x1014, parts);
+ put_md5(image+0x04, image+0x14, *len-0x14);
+
+ return image;
+}
+
+/**
+ Generates the firmware image in sysupgrade format
+
+ This makes some assumptions about the provided flash and image partition tables and
+ should be generalized when TP-LINK starts building its safeloader into hardware with
+ different flash layouts.
+*/
+void * generate_sysupgrade_image(const struct flash_partition_entry *flash_parts, const struct image_partition_entry *image_parts, size_t *len) {
+ const struct flash_partition_entry *flash_os_image = &flash_parts[5];
+ const struct flash_partition_entry *flash_soft_version = &flash_parts[6];
+ const struct flash_partition_entry *flash_support_list = &flash_parts[7];
+ const struct flash_partition_entry *flash_file_system = &flash_parts[8];
+
+ const struct image_partition_entry *image_os_image = &image_parts[3];
+ const struct image_partition_entry *image_soft_version = &image_parts[1];
+ const struct image_partition_entry *image_support_list = &image_parts[2];
+ const struct image_partition_entry *image_file_system = &image_parts[4];
+
+ assert(strcmp(flash_os_image->name, "os-image") == 0);
+ assert(strcmp(flash_soft_version->name, "soft-version") == 0);
+ assert(strcmp(flash_support_list->name, "support-list") == 0);
+ assert(strcmp(flash_file_system->name, "file-system") == 0);
+
+ assert(strcmp(image_os_image->name, "os-image") == 0);
+ assert(strcmp(image_soft_version->name, "soft-version") == 0);
+ assert(strcmp(image_support_list->name, "support-list") == 0);
+ assert(strcmp(image_file_system->name, "file-system") == 0);
+
+ if (image_os_image->size > flash_os_image->size)
+ error(1, 0, "kernel image too big (more than %u bytes)", (unsigned)flash_os_image->size);
+ if (image_file_system->size > flash_file_system->size)
+ error(1, 0, "rootfs image too big (more than %u bytes)", (unsigned)flash_file_system->size);
+
+ *len = flash_file_system->base - flash_os_image->base + image_file_system->size;
+
+ uint8_t *image = malloc(*len);
+ if (!image)
+ error(1, errno, "malloc");
+
+ memset(image, 0xff, *len);
+
+ memcpy(image, image_os_image->data, image_os_image->size);
+ memcpy(image + flash_soft_version->base - flash_os_image->base, image_soft_version->data, image_soft_version->size);
+ memcpy(image + flash_support_list->base - flash_os_image->base, image_support_list->data, image_support_list->size);
+ memcpy(image + flash_file_system->base - flash_os_image->base, image_file_system->data, image_file_system->size);
+
+ return image;
+}
+
+
+/** Generates an image for CPE210/220/510/520 and writes it to a file */
+static void do_cpe510(const char *output, const char *kernel_image, const char *rootfs_image, uint32_t rev, bool add_jffs2_eof, bool sysupgrade) {
+ struct image_partition_entry parts[6] = {};
+
+ parts[0] = make_partition_table(cpe510_partitions);
+ parts[1] = make_soft_version(rev);
+ parts[2] = make_support_list(cpe510_support_list, sizeof(cpe510_support_list)-1);
+ parts[3] = read_file("os-image", kernel_image, false);
+ parts[4] = read_file("file-system", rootfs_image, add_jffs2_eof);
+
+ size_t len;
+ void *image;
+ if (sysupgrade)
+ image = generate_sysupgrade_image(cpe510_partitions, parts, &len);
+ else
+ image = generate_factory_image(cpe510_vendor, sizeof(cpe510_vendor)-1, parts, &len);
+
+ FILE *file = fopen(output, "wb");
+ if (!file)
+ error(1, errno, "unable to open output file");
+
+ if (fwrite(image, len, 1, file) != 1)
+ error(1, 0, "unable to write output file");
+
+ fclose(file);
+
+ free(image);
+
+ size_t i;
+ for (i = 0; parts[i].name; i++)
+ free_image_partition(parts[i]);
+}
+
+
+/** Usage output */
+void usage(const char *argv0) {
+ fprintf(stderr,
+ "Usage: %s [OPTIONS...]\n"
+ "\n"
+ "Options:\n"
+ " -B <board> create image for the board specified with <board>\n"
+ " -k <file> read kernel image from the file <file>\n"
+ " -r <file> read rootfs image from the file <file>\n"
+ " -o <file> write output to the file <file>\n"
+ " -V <rev> sets the revision number to <rev>\n"
+ " -j add jffs2 end-of-filesystem markers\n"
+ " -S create sysupgrade instead of factory image\n"
+ " -h show this help\n",
+ argv0
+ );
+};
+
+
+int main(int argc, char *argv[]) {
+ const char *board = NULL, *kernel_image = NULL, *rootfs_image = NULL, *output = NULL;
+ bool add_jffs2_eof = false, sysupgrade = false;
+ unsigned rev = 0;
+
+ while (true) {
+ int c;
+
+ c = getopt(argc, argv, "B:k:r:o:V:jSh");
+ if (c == -1)
+ break;
+
+ switch (c) {
+ case 'B':
+ board = optarg;
+ break;
+
+ case 'k':
+ kernel_image = optarg;
+ break;
+
+ case 'r':
+ rootfs_image = optarg;
+ break;
+
+ case 'o':
+ output = optarg;
+ break;
+
+ case 'V':
+ sscanf(optarg, "r%u", &rev);
+ break;
+
+ case 'j':
+ add_jffs2_eof = true;
+ break;
+
+ case 'S':
+ sysupgrade = true;
+ break;
+
+ case 'h':
+ usage(argv[0]);
+ return 0;
+
+ default:
+ usage(argv[0]);
+ return 1;
+ }
+ }
+
+ if (!board)
+ error(1, 0, "no board has been specified");
+ if (!kernel_image)
+ error(1, 0, "no kernel image has been specified");
+ if (!rootfs_image)
+ error(1, 0, "no rootfs image has been specified");
+ if (!output)
+ error(1, 0, "no output filename has been specified");
+
+ if (strcmp(board, "CPE510") == 0)
+ do_cpe510(output, kernel_image, rootfs_image, rev, add_jffs2_eof, sysupgrade);
+ else
+ error(1, 0, "unsupported board %s", board);
+
+ return 0;
+}

View File

@ -0,0 +1,471 @@
From: Matthias Schiffer <mschiffer@universe-factory.net>
Date: Wed, 26 Nov 2014 19:57:50 +0100
Subject: ar71xx: add support for TP-LINK CPE210/220/510/520
This adds support for the TP-LINK CPE210/220/510/520 (Pharos series). These
devices are very similar to the Ubiquiti NanoStations, but with better specs:
faster CPU, more RAM, 2x2 MIMO.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 1864b11..4b510dd 100755
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -43,6 +43,9 @@ get_status_led() {
cap4200ag)
status_led="senao:green:pwr"
;;
+ cpe510)
+ status_led="tp-link:green:link4"
+ ;;
db120)
status_led="db120:green:status"
;;
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
index d3b766d..fb8df40 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
@@ -61,6 +61,16 @@ carambola2)
ucidef_set_led_wlan "wlan" "WLAN" "carambola2:green:wlan" "phy0tpt"
;;
+cpe510)
+ ucidef_set_led_switch "lan0" "LAN0" "tp-link:green:lan0" "switch0" "0x20"
+ ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
+ ucidef_set_rssimon "wlan0" "40000" "1"
+ ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:green:link1" "wlan0" "1" "100" "0" "13"
+ ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:green:link2" "wlan0" "26" "100" "-25" "13"
+ ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:green:link3" "wlan0" "51" "100" "-50" "13"
+ ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "76" "100" "-75" "13"
+ ;;
+
db120)
ucidef_set_led_usbdev "usb" "USB" "db120:green:usb" "1-1"
;;
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
index c5cfd67..a9f00fa 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
@@ -62,6 +62,13 @@ tl-wdr4900-v2)
ucidef_add_switch_vlan "switch0" "2" "1 6"
;;
+cpe510)
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ ucidef_add_switch "switch0" "1" "1"
+ ucidef_add_switch_vlan "switch0" "1" "0t 5"
+ ucidef_add_switch_vlan "switch0" "2" "0t 4"
+ ;;
+
db120 |\
rb-2011l | \
rb-2011uas |\
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 5aceaee..0b0a8d6 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -229,6 +229,39 @@ tplink_board_detect() {
AR71XX_MODEL="$model $hwver"
}
+tplink_pharos_get_model_string() {
+ local part
+ part=$(find_mtd_part 'product-info')
+ [ -z "$part" ] && return 1
+
+ # The returned string will end with \r\n, but we don't remove it here
+ # to simplify matching against it in the sysupgrade image check
+ dd if=$part bs=1 skip=4360 2>/dev/null | head -n 1
+}
+
+tplink_pharos_board_detect() {
+ local model_string="$(tplink_pharos_get_model_string | tr -d '\r')"
+ local oIFS="$IFS"; IFS=":"; set -- $model_string; IFS="$oIFS"
+ local model
+
+ case "$1" in
+ 'CPE210(TP-LINK|UN|N300-2)')
+ model='TP-Link CPE210'
+ ;;
+ 'CPE220(TP-LINK|UN|N300-2)')
+ model='TP-Link CPE220'
+ ;;
+ 'CPE510(TP-LINK|UN|N300-5)')
+ model='TP-Link CPE510'
+ ;;
+ 'CPE520(TP-LINK|UN|N300-5)')
+ model='TP-Link CPE520'
+ ;;
+ esac
+
+ [ -n "$model" ] && AR71XX_MODEL="$model v$2"
+}
+
ar71xx_board_detect() {
local machine
local name
@@ -302,6 +335,10 @@ ar71xx_board_detect() {
*CAP4200AG)
name="cap4200ag"
;;
+ *"CPE210/220/510/520")
+ name="cpe510"
+ tplink_pharos_board_detect
+ ;;
*"DB120 reference board")
name="db120"
;;
@@ -751,11 +788,8 @@ ar71xx_board_detect() {
;;
esac
- case "$machine" in
- *TL-WR* | *TL-WA* | *TL-MR* | *TL-WD* | *Archer*)
+ [ -z "$AR71XX_MODEL" ] && [ "${machine:0:8}" = 'TP-LINK ' ] && \
tplink_board_detect "$machine"
- ;;
- esac
[ -z "$name" ] && name="unknown"
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 846954c..15e998c 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -70,6 +70,33 @@ tplink_get_image_boot_size() {
get_image "$@" | dd bs=4 count=1 skip=37 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
}
+tplink_pharos_check_image() {
+ local magic_long="$(get_magic_long "$1")"
+ [ "$magic_long" != "7f454c46" ] && {
+ echo "Invalid image magic '$magic_long'"
+ return 1
+ }
+
+ local model_string="$(tplink_pharos_get_model_string)"
+ local line
+
+ # Here $1 is given to dd directly instead of get_image as otherwise the skip
+ # will take almost a second (as dd can't seek then)
+ #
+ # This will fail if the image isn't local, but that's fine: as the
+ # read loop won't be executed at all, it will return true, so the image
+ # is accepted (loading the first 1.5M of a remote image for this check seems
+ # a bit extreme)
+ dd if="$1" bs=1 skip=1511432 count=1024 2>/dev/null | while read line; do
+ [ "$line" == "$model_string" ] && break
+ done || {
+ echo "Unsupported image (model not in support-list)"
+ return 1
+ }
+
+ return 0
+}
+
seama_get_type_magic() {
get_image "$@" | dd bs=1 count=4 skip=53 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
}
@@ -214,6 +241,11 @@ platform_check_image() {
return 0
;;
+ cpe510)
+ tplink_pharos_check_image "$1" && return 0
+ return 1
+ ;;
+
dir-825-b1 | \
tew-673gru)
dir825b_check_image "$1" && return 0
diff --git a/target/linux/ar71xx/config-3.10 b/target/linux/ar71xx/config-3.10
index 9a8378a..2f05ec6 100644
--- a/target/linux/ar71xx/config-3.10
+++ b/target/linux/ar71xx/config-3.10
@@ -39,6 +39,7 @@ CONFIG_ATH79_MACH_AW_NR580=y
CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y
CONFIG_ATH79_MACH_CAP4200AG=y
CONFIG_ATH79_MACH_CARAMBOLA2=y
+CONFIG_ATH79_MACH_CPE510=y
CONFIG_ATH79_MACH_DB120=y
CONFIG_ATH79_MACH_DIR_505_A1=y
CONFIG_ATH79_MACH_DIR_600_A1=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c
new file mode 100644
index 0000000..8bf5c0f
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c
@@ -0,0 +1,107 @@
+/*
+ * TP-LINK CPE210/220/510/520 board support
+ *
+ * Copyright (C) 2014 Matthias Schiffer <mschiffer@universe-factory.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+
+#define CPE510_GPIO_LED_LAN0 11
+#define CPE510_GPIO_LED_LAN1 12
+#define CPE510_GPIO_LED_L1 13
+#define CPE510_GPIO_LED_L2 14
+#define CPE510_GPIO_LED_L3 15
+#define CPE510_GPIO_LED_L4 16
+
+#define CPE510_GPIO_BTN_RESET 4
+
+#define CPE510_KEYS_POLL_INTERVAL 20 /* msecs */
+#define CPE510_KEYS_DEBOUNCE_INTERVAL (3 * CPE510_KEYS_POLL_INTERVAL)
+
+
+static struct gpio_led cpe510_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:lan0",
+ .gpio = CPE510_GPIO_LED_LAN0,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:lan1",
+ .gpio = CPE510_GPIO_LED_LAN1,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:link1",
+ .gpio = CPE510_GPIO_LED_L1,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:link2",
+ .gpio = CPE510_GPIO_LED_L2,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:link3",
+ .gpio = CPE510_GPIO_LED_L3,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:link4",
+ .gpio = CPE510_GPIO_LED_L4,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button cpe510_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = CPE510_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = CPE510_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+
+static void __init cpe510_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f830008);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ /* Disable JTAG, enabling GPIOs 0-3 */
+ /* Configure OBS4 line, for GPIO 4*/
+ ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE,
+ AR934X_GPIO_FUNC_CLK_OBS4_EN);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(cpe510_leds_gpio),
+ cpe510_leds_gpio);
+
+ ath79_register_gpio_keys_polled(1, CPE510_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(cpe510_gpio_keys),
+ cpe510_gpio_keys);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_mdio(1, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_register_eth(1);
+
+ ath79_register_wmac(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_CPE510, "CPE510", "TP-LINK CPE210/220/510/520",
+ cpe510_setup);
diff --git a/target/linux/ar71xx/generic/profiles/tp-link.mk b/target/linux/ar71xx/generic/profiles/tp-link.mk
index 78333be..a9d170c 100644
--- a/target/linux/ar71xx/generic/profiles/tp-link.mk
+++ b/target/linux/ar71xx/generic/profiles/tp-link.mk
@@ -16,6 +16,17 @@ endef
$(eval $(call Profile,ARCHERC7))
+define Profile/CPE510
+ NAME:=TP-LINK CPE210/220/510/520
+ PACKAGES:=rssileds
+endef
+
+define Profile/CPE510/Description
+ Package set optimized for the TP-LINK CPE210/220/510/520.
+endef
+$(eval $(call Profile,CPE510))
+
+
define Profile/TLMR10U
NAME:=TP-LINK TL-MR10U
PACKAGES:=kmod-usb-core kmod-usb2
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index 683c238..5ff7f35 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -261,6 +261,7 @@ cameo_ap121_mtdlayout_8M=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k
cameo_db120_mtdlayout=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,15936k(firmware),192k(lang)ro,64k(mac)ro,64k(art)ro
cameo_db120_mtdlayout_8M=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,7872k(firmware),128k(lang)ro,64k(art)ro
cap4200ag_mtdlayout=mtdparts=spi0.0:256k(u-boot),64k(u-boot-env),320k(custom)ro,1536k(kernel),12096k(rootfs),2048k(failsafe),64k(art),13632k@0xa0000(firmware)
+cpe510_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(pation-table)ro,64k(product-info)ro,1536k(kernel),6144k(rootfs),192k(config)ro,64k(ART)ro,7680k@0x40000(firmware)
eap300v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom),13632k(firmware),2048k(failsafe),64k(art)ro
db120_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
cameo_ap94_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,1600k(unknown)ro,64k@0x7f0000(caldata_copy)
@@ -811,6 +812,32 @@ define Image/Build/TPLINK-LZMA/initramfs
endef
+Image/Build/TPLINK-SAFELOADER/buildkernel=$(call PatchKernelLzma,$(2),$(3) $(4))
+
+define Image/Build/TPLINK-SAFELOADER
+ -rm -rf $(KDIR)/lzma-loader
+ $(LOADER_MAKE) LOADER=loader-$(2).elf\
+ LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
+ LOADER_DATA="$(KDIR_TMP)/vmlinux-$(2).bin.lzma" BOARD="$(2)" \
+ compile loader.elf
+
+ -$(STAGING_DIR_HOST)/bin/tplink-safeloader \
+ -B $(5) \
+ -k $(KDIR)/loader-$(2).elf \
+ -r $(KDIR)/root.$(1) \
+ -V $(REVISION) \
+ -j \
+ -o $(call factoryname,$(1),$(2))
+ -$(STAGING_DIR_HOST)/bin/tplink-safeloader \
+ -B $(5) \
+ -k $(KDIR)/loader-$(2).elf \
+ -r $(KDIR)/root.$(1) \
+ -V $(REVISION) \
+ -j -S \
+ -o $(call sysupname,$(1),$(2))
+endef
+
+
define Image/Build/CyberTAN
echo -n '' > $(KDIR_TMP)/empty.bin
$(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp \
@@ -1226,6 +1253,8 @@ $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWDR4310V1,tl-wdr4310-v1,TL-WDR4
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWDR4900V2,tl-wdr4900-v2,TL-WDR4900-v2,ttyS0,115200,0x49000002,1,8Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,MW4530RV1,mw4530r-v1,TL-WDR4300,ttyS0,115200,0x45300001,1,8Mlzma))
+$(eval $(call SingleProfile,TPLINK-SAFELOADER,64kraw,CPE510,cpe210-220-510-520,CPE510,ttyS0,115200,$$(cpe510_mtdlayout),CPE510))
+
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,SMART-300,smart-300,SMART-300,ttyS0,115200,0x93410001,1,8Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,OOLITE,oolite,GS-OOLITE,ttyATH0,115200,0x3C000101,1,16Mlzma))
diff --git a/target/linux/ar71xx/patches-3.10/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.10/610-MIPS-ath79-openwrt-machines.patch
index 3669f26..516d52d 100644
--- a/target/linux/ar71xx/patches-3.10/610-MIPS-ath79-openwrt-machines.patch
+++ b/target/linux/ar71xx/patches-3.10/610-MIPS-ath79-openwrt-machines.patch
@@ -1,6 +1,6 @@
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
-@@ -16,22 +16,144 @@
+@@ -16,22 +16,145 @@
enum ath79_mach_type {
ATH79_MACH_GENERIC = 0,
@@ -24,6 +24,7 @@
+ ATH79_MACH_BHU_BXU2000N2_A1, /* BHU BXU2000n-2 A1 */
+ ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */
+ ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */
++ ATH79_MACH_CPE510, /* TP-LINK CPE510 */
ATH79_MACH_DB120, /* Atheros DB120 reference board */
ATH79_MACH_PB44, /* Atheros PB44 reference board */
+ ATH79_MACH_DIR_505_A1, /* D-Link DIR-505 rev. A1 */
@@ -209,7 +210,7 @@
config ATH79_MACH_AP121
bool "Atheros AP121 reference board"
select SOC_AR933X
-@@ -9,64 +64,736 @@ config ATH79_MACH_AP121
+@@ -9,64 +64,745 @@ config ATH79_MACH_AP121
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
@@ -709,6 +710,15 @@
-config ATH79_MACH_AP81
- bool "Atheros AP81 reference board"
++config ATH79_MACH_CPE510
++ bool "TP-LINK CPE510 support"
++ select SOC_AR934X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_WMAC
++
+config ATH79_MACH_TL_MR11U
+ bool "TP-LINK TL-MR11U/TL-MR3040 support"
+ select SOC_AR933X
@@ -972,7 +982,7 @@
config ATH79_MACH_UBNT_XM
bool "Ubiquiti Networks XM/UniFi boards"
-@@ -83,6 +810,65 @@ config ATH79_MACH_UBNT_XM
+@@ -83,6 +819,65 @@ config ATH79_MACH_UBNT_XM
Say 'Y' here if you want your kernel to support the
Ubiquiti Networks XM (rev 1.0) board.
@@ -1038,7 +1048,7 @@
endmenu
config SOC_AR71XX
-@@ -132,7 +918,10 @@ config ATH79_DEV_DSA
+@@ -132,7 +927,10 @@ config ATH79_DEV_DSA
config ATH79_DEV_ETH
def_bool n
@@ -1050,7 +1060,7 @@
def_bool n
config ATH79_DEV_GPIO_BUTTONS
-@@ -164,4 +953,7 @@ config ATH79_PCI_ATH9K_FIXUP
+@@ -164,4 +962,7 @@ config ATH79_PCI_ATH9K_FIXUP
config ATH79_ROUTERBOOT
def_bool n
@@ -1060,7 +1070,7 @@
endif
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
-@@ -38,9 +38,90 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
+@@ -38,9 +38,91 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
#
# Machines
#
@@ -1079,6 +1089,7 @@
+obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o
+obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o
+obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o
++obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o
obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
+obj-$(CONFIG_ATH79_MACH_DIR_505_A1) += mach-dir-505-a1.o
+obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o

View File

@ -68,6 +68,7 @@ CONFIG_ATH79_MACH_AP136=y
CONFIG_ATH79_MACH_AP81=y
CONFIG_ATH79_MACH_AP83=y
CONFIG_ATH79_MACH_AP96=y
CONFIG_ATH79_MACH_CPE510=y
CONFIG_ATH79_MACH_DB120=y
CONFIG_ATH79_MACH_PB42=y
CONFIG_ATH79_MACH_PB44=y

View File

@ -2,6 +2,13 @@
## TP-Link
# CPE210/220/510/520
$(eval $(call GluonProfile,CPE510,rssileds))
$(eval $(call GluonModel,CPE510,cpe210-220-510-520-squashfs,tp-link-cpe210-v1.0))
$(eval $(call GluonModel,CPE510,cpe210-220-510-520-squashfs,tp-link-cpe220-v1.0))
$(eval $(call GluonModel,CPE510,cpe210-220-510-520-squashfs,tp-link-cpe510-v1.0))
$(eval $(call GluonModel,CPE510,cpe210-220-510-520-squashfs,tp-link-cpe520-v1.0))
# TL-WR703N v1
$(eval $(call GluonProfile,TLWR703))
$(eval $(call GluonModel,TLWR703,tl-wr703n-v1-squashfs,tp-link-tl-wr703n-v1))