Merge pull request #1290 from kb-light/er-x-sfp-v2017.1.x
Backport er-x-sfp (master -> v2017.1.x)
This commit is contained in:
Matthias Schiffer
GitHub
commit
a4ce8474ff
|
|
@ -22,6 +22,9 @@ msgstr "Deaktiviert"
|
|||
msgid "Enable PoE Passthrough"
|
||||
msgstr "PoE-Passthrough aktivieren"
|
||||
|
||||
msgid "Enable PoE Power Port %s"
|
||||
msgstr "PoE-Ausgabe auf Port %s aktivieren"
|
||||
|
||||
msgid "Enable meshing on the LAN interface"
|
||||
msgstr "Mesh auf dem LAN-Port aktivieren"
|
||||
|
||||
|
|
|
|||
|
|
@ -22,6 +22,9 @@ msgstr "Désactivé"
|
|||
msgid "Enable PoE Passthrough"
|
||||
msgstr ""
|
||||
|
||||
msgid "Enable PoE Power Port %s"
|
||||
msgstr ""
|
||||
|
||||
msgid "Enable meshing on the LAN interface"
|
||||
msgstr "Activer le réseau MESH sur le port LAN"
|
||||
|
||||
|
|
|
|||
|
|
@ -13,6 +13,9 @@ msgstr ""
|
|||
msgid "Enable PoE Passthrough"
|
||||
msgstr ""
|
||||
|
||||
msgid "Enable PoE Power Port %s"
|
||||
msgstr ""
|
||||
|
||||
msgid "Enable meshing on the LAN interface"
|
||||
msgstr ""
|
||||
|
||||
|
|
|
|||
|
|
@ -110,7 +110,15 @@ uci:foreach("system", "gpio_switch", function(s)
|
|||
if not section then
|
||||
section = f:section(Section)
|
||||
end
|
||||
local poe = section:option(Flag, s[".name"], translate("Enable " .. s.name))
|
||||
|
||||
local port = s.name:match("^PoE Power Port(%d*)$")
|
||||
local name
|
||||
if port then
|
||||
name = translatef("Enable PoE Power Port %s", port)
|
||||
else
|
||||
name = translate("Enable " .. s.name)
|
||||
end
|
||||
local poe = section:option(Flag, s[".name"], name)
|
||||
poe.default = uci:get_bool("system", s[".name"], "value")
|
||||
|
||||
function poe:write(data)
|
||||
|
|
|
|||
|
|
@ -0,0 +1,35 @@
|
|||
From: Sven Roederer <devel-sven@geroedel.de>
|
||||
Date: Fri, 5 May 2017 22:18:44 +0200
|
||||
Subject: ramips: use GPIO_ACTIVE macros in UBNT-ERX.dts
|
||||
|
||||
- reorder includes
|
||||
- use GPIO_ACTIVE_LOW macro instead of hardcoded "1"
|
||||
|
||||
Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
|
||||
|
||||
diff --git a/target/linux/ramips/dts/UBNT-ERX.dts b/target/linux/ramips/dts/UBNT-ERX.dts
|
||||
index 0b2da95b30f0e181e1929502b8ef1aa50a684f69..cf86bbb7e67b1c521c279367ee9e99fee88fae85 100644
|
||||
--- a/target/linux/ramips/dts/UBNT-ERX.dts
|
||||
+++ b/target/linux/ramips/dts/UBNT-ERX.dts
|
||||
@@ -1,9 +1,10 @@
|
||||
-#include <dt-bindings/input/input.h>
|
||||
-
|
||||
/dts-v1/;
|
||||
|
||||
#include "mt7621.dtsi"
|
||||
|
||||
+#include <dt-bindings/gpio/gpio.h>
|
||||
+#include <dt-bindings/input/input.h>
|
||||
+
|
||||
/ {
|
||||
model = "UBNT-ERX";
|
||||
|
||||
@@ -24,7 +25,7 @@
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
- gpios = <&gpio0 12 1>;
|
||||
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,413 @@
|
|||
From: Sven Roederer <devel-sven@geroedel.de>
|
||||
Date: Mon, 29 May 2017 11:24:49 +0200
|
||||
Subject: ramips: add support for Ubiquiti EdgeRouter X-SFP
|
||||
|
||||
This patch adds support for the Ubiquiti EdgeRouter X-SFP and
|
||||
improves support for the EdgeRouter X (PoE-passthrough).
|
||||
|
||||
Specification:
|
||||
- SoC: MediaTek MT7621AT
|
||||
- Flash: 256 MiB
|
||||
- RAM: 265 MiB
|
||||
- Ethernet: 5 x LAN (1000 Mbps)
|
||||
- UART: 1 x UART on PCB (3.3V, RX, TX, GND) - 57600 8N1
|
||||
- EdgeRouter X:
|
||||
- 1 x PoE-Passtrough (Eth4)
|
||||
- powered by Wallwart or passive PoE
|
||||
- EdgeRouter X-SFP:
|
||||
- 5 x PoE-Out (24V, passive)
|
||||
- 1 x SFP (unknown status)
|
||||
- powered by Wallwart (24V)
|
||||
|
||||
Doesn't work:
|
||||
* SoC has crypto engine but no open driver.
|
||||
* SoC has nat acceleration, but no open driver.
|
||||
* This router has 2MB spi flash soldered in but MT
|
||||
nand/spi drivers do not support pin sharing,
|
||||
so it is not accessable and disabled. Stock
|
||||
firmware could read it and it was empty.
|
||||
|
||||
Installation
|
||||
|
||||
via vendor firmware:
|
||||
- build an Initrd-image (> 3MiB) and upload the factory-image
|
||||
- initrd can have luci-mod-failsafe
|
||||
- flash final firmware via LuCI / sysupgrade on rebooted system
|
||||
|
||||
via TFTP:
|
||||
- stop uboot into tftp-load into option "1"
|
||||
- upload factory.bin image
|
||||
|
||||
Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
|
||||
|
||||
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
|
||||
index 1778dc93297136e3196ad3f74e4b3bea7535cee0..1f5c6429201ba05fc14ff09c6c562d2c114f2a63 100755
|
||||
--- a/target/linux/ramips/base-files/etc/board.d/02_network
|
||||
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
|
||||
@@ -146,6 +146,7 @@ ramips_setup_interfaces()
|
||||
rb750gr3|\
|
||||
rt-n14u|\
|
||||
ubnt-erx|\
|
||||
+ ubnt-erx-sfp|\
|
||||
ur-326n4g|\
|
||||
wrtnode|\
|
||||
wrtnode2p | \
|
||||
diff --git a/target/linux/ramips/base-files/etc/board.d/03_gpio_switches b/target/linux/ramips/base-files/etc/board.d/03_gpio_switches
|
||||
new file mode 100755
|
||||
index 0000000000000000000000000000000000000000..859dfb31f51244e69d3dce5fc80b329cb57729f3
|
||||
--- /dev/null
|
||||
+++ b/target/linux/ramips/base-files/etc/board.d/03_gpio_switches
|
||||
@@ -0,0 +1,25 @@
|
||||
+#!/bin/sh
|
||||
+
|
||||
+. /lib/functions/uci-defaults.sh
|
||||
+. /lib/ramips.sh
|
||||
+
|
||||
+board_config_update
|
||||
+
|
||||
+board=$(ramips_board_name)
|
||||
+
|
||||
+case "$board" in
|
||||
+ubnt-erx)
|
||||
+ ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "0"
|
||||
+ ;;
|
||||
+ubnt-erx-sfp)
|
||||
+ ucidef_add_gpio_switch "poe_power_port0" "PoE Power Port0" "496"
|
||||
+ ucidef_add_gpio_switch "poe_power_port1" "PoE Power Port1" "497"
|
||||
+ ucidef_add_gpio_switch "poe_power_port2" "PoE Power Port2" "498"
|
||||
+ ucidef_add_gpio_switch "poe_power_port3" "PoE Power Port3" "499"
|
||||
+ ucidef_add_gpio_switch "poe_power_port4" "PoE Power Port4" "500"
|
||||
+ ;;
|
||||
+esac
|
||||
+
|
||||
+board_config_flush
|
||||
+
|
||||
+exit 0
|
||||
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
|
||||
index 17ada648931f16d3e85630dd341defb89ba50d6f..b1091f66b2897a19bd01d4a26a1b3647656fa62b 100755
|
||||
--- a/target/linux/ramips/base-files/lib/ramips.sh
|
||||
+++ b/target/linux/ramips/base-files/lib/ramips.sh
|
||||
@@ -466,6 +466,9 @@ ramips_board_detect() {
|
||||
*"UBNT-ERX")
|
||||
name="ubnt-erx"
|
||||
;;
|
||||
+ *"UBNT-ERX-SFP")
|
||||
+ name="ubnt-erx-sfp"
|
||||
+ ;;
|
||||
*"UR-326N4G")
|
||||
name="ur-326n4g"
|
||||
;;
|
||||
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
|
||||
index a5cca2080d3b96cef92286b1b15f4f8832d9f8c5..d3efc2dd37ed855a1c0e966e448b67ae73324d5f 100755
|
||||
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
|
||||
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
|
||||
@@ -234,7 +234,8 @@ platform_check_image() {
|
||||
}
|
||||
return 0
|
||||
;;
|
||||
- ubnt-erx)
|
||||
+ ubnt-erx|\
|
||||
+ ubnt-erx-sfp)
|
||||
nand_do_platform_check "$board" "$1"
|
||||
return $?;
|
||||
;;
|
||||
@@ -248,7 +249,8 @@ platform_nand_pre_upgrade() {
|
||||
local board=$(ramips_board_name)
|
||||
|
||||
case "$board" in
|
||||
- ubnt-erx)
|
||||
+ ubnt-erx|\
|
||||
+ ubnt-erx-sfp)
|
||||
platform_upgrade_ubnt_erx "$ARGV"
|
||||
;;
|
||||
esac
|
||||
@@ -258,7 +260,8 @@ platform_do_upgrade() {
|
||||
local board=$(ramips_board_name)
|
||||
|
||||
case "$board" in
|
||||
- ubnt-erx)
|
||||
+ ubnt-erx|\
|
||||
+ ubnt-erx-sfp)
|
||||
nand_do_upgrade "$ARGV"
|
||||
;;
|
||||
*)
|
||||
diff --git a/target/linux/ramips/dts/UBNT-ER-e50.dtsi b/target/linux/ramips/dts/UBNT-ER-e50.dtsi
|
||||
new file mode 100644
|
||||
index 0000000000000000000000000000000000000000..b38c7194942db9f0a713fd8f707b53820d07c78e
|
||||
--- /dev/null
|
||||
+++ b/target/linux/ramips/dts/UBNT-ER-e50.dtsi
|
||||
@@ -0,0 +1,106 @@
|
||||
+#include "mt7621.dtsi"
|
||||
+
|
||||
+#include <dt-bindings/gpio/gpio.h>
|
||||
+#include <dt-bindings/input/input.h>
|
||||
+
|
||||
+/ {
|
||||
+ compatible = "ubiquiti,edgerouterx";
|
||||
+
|
||||
+ memory@0 {
|
||||
+ device_type = "memory";
|
||||
+ reg = <0x0 0x10000000>;
|
||||
+ };
|
||||
+
|
||||
+ chosen {
|
||||
+ bootargs = "console=ttyS0,57600";
|
||||
+ };
|
||||
+
|
||||
+ gpio-keys-polled {
|
||||
+ compatible = "gpio-keys-polled";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+ poll-interval = <20>;
|
||||
+
|
||||
+ reset {
|
||||
+ label = "reset";
|
||||
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
|
||||
+ linux,code = <KEY_RESTART>;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+ðernet {
|
||||
+ mtd-mac-address = <&factory 0x22>;
|
||||
+};
|
||||
+
|
||||
+&nand {
|
||||
+ status = "okay";
|
||||
+
|
||||
+ partition@0 {
|
||||
+ label = "u-boot";
|
||||
+ reg = <0x0 0x80000>;
|
||||
+ read-only;
|
||||
+ };
|
||||
+
|
||||
+ partition@80000 {
|
||||
+ label = "u-boot-env";
|
||||
+ reg = <0x80000 0x60000>;
|
||||
+ read-only;
|
||||
+ };
|
||||
+
|
||||
+ factory: partition@e0000 {
|
||||
+ label = "factory";
|
||||
+ reg = <0xe0000 0x60000>;
|
||||
+ };
|
||||
+
|
||||
+ partition@140000 {
|
||||
+ label = "kernel1";
|
||||
+ reg = <0x140000 0x300000>;
|
||||
+ };
|
||||
+
|
||||
+ partition@440000 {
|
||||
+ label = "kernel2";
|
||||
+ reg = <0x440000 0x300000>;
|
||||
+ };
|
||||
+
|
||||
+ partition@740000 {
|
||||
+ label = "ubi";
|
||||
+ reg = <0x740000 0xf7c0000>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&pinctrl {
|
||||
+ state_default: pinctrl0 {
|
||||
+ gpio {
|
||||
+ ralink,group = "uart2", "uart3", "i2c", "pcie", "rgmii2", "jtag";
|
||||
+ ralink,function = "gpio";
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&spi0 {
|
||||
+ /* This board has 2Mb spi flash soldered in and visible
|
||||
+ from manufacturer's firmware.
|
||||
+ But this SoC shares spi and nand pins,
|
||||
+ and current driver does't handle this sharing well */
|
||||
+ status = "disabled";
|
||||
+
|
||||
+ m25p80@0 {
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <1>;
|
||||
+ compatible = "jedec,spi-nor";
|
||||
+ reg = <1>;
|
||||
+ spi-max-frequency = <10000000>;
|
||||
+ m25p,chunked-io = <32>;
|
||||
+
|
||||
+ partition@0 {
|
||||
+ label = "spi";
|
||||
+ reg = <0x0 0x200000>;
|
||||
+ read-only;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&xhci {
|
||||
+ status = "disabled";
|
||||
+};
|
||||
diff --git a/target/linux/ramips/dts/UBNT-ERX-SFP.dts b/target/linux/ramips/dts/UBNT-ERX-SFP.dts
|
||||
new file mode 100644
|
||||
index 0000000000000000000000000000000000000000..ca26d817211e5a5a20a7da926cd2aee726875780
|
||||
--- /dev/null
|
||||
+++ b/target/linux/ramips/dts/UBNT-ERX-SFP.dts
|
||||
@@ -0,0 +1,24 @@
|
||||
+/dts-v1/;
|
||||
+
|
||||
+#include "UBNT-ER-e50.dtsi"
|
||||
+
|
||||
+#include <dt-bindings/gpio/gpio.h>
|
||||
+
|
||||
+/ {
|
||||
+ model = "UBNT-ERX-SFP";
|
||||
+ compatible = "ubiquiti,edgerouterx-sfp";
|
||||
+
|
||||
+ i2c-gpio {
|
||||
+ compatible = "i2c-gpio";
|
||||
+ gpios = <&gpio0 3 GPIO_ACTIVE_HIGH /* sda */
|
||||
+ &gpio0 4 GPIO_ACTIVE_HIGH /* scl */
|
||||
+ >;
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+
|
||||
+ pca9555@25 {
|
||||
+ compatible = "pca9555";
|
||||
+ reg = <0x25>;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
diff --git a/target/linux/ramips/dts/UBNT-ERX.dts b/target/linux/ramips/dts/UBNT-ERX.dts
|
||||
index cf86bbb7e67b1c521c279367ee9e99fee88fae85..556d1156c352f76a94c6e39bc3b58c88f08815be 100644
|
||||
--- a/target/linux/ramips/dts/UBNT-ERX.dts
|
||||
+++ b/target/linux/ramips/dts/UBNT-ERX.dts
|
||||
@@ -1,108 +1,7 @@
|
||||
/dts-v1/;
|
||||
|
||||
-#include "mt7621.dtsi"
|
||||
-
|
||||
-#include <dt-bindings/gpio/gpio.h>
|
||||
-#include <dt-bindings/input/input.h>
|
||||
+#include "UBNT-ER-e50.dtsi"
|
||||
|
||||
/ {
|
||||
model = "UBNT-ERX";
|
||||
-
|
||||
- memory@0 {
|
||||
- device_type = "memory";
|
||||
- reg = <0x0 0x10000000>;
|
||||
- };
|
||||
-
|
||||
- chosen {
|
||||
- bootargs = "console=ttyS0,57600";
|
||||
- };
|
||||
-
|
||||
- gpio-keys-polled {
|
||||
- compatible = "gpio-keys-polled";
|
||||
- #address-cells = <1>;
|
||||
- #size-cells = <0>;
|
||||
- poll-interval = <20>;
|
||||
-
|
||||
- reset {
|
||||
- label = "reset";
|
||||
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
|
||||
- linux,code = <KEY_RESTART>;
|
||||
- };
|
||||
- };
|
||||
-};
|
||||
-
|
||||
-ðernet {
|
||||
- mtd-mac-address = <&factory 0x22>;
|
||||
-};
|
||||
-
|
||||
-&nand {
|
||||
- status = "okay";
|
||||
-
|
||||
- partition@0 {
|
||||
- label = "u-boot";
|
||||
- reg = <0x0 0x80000>;
|
||||
- read-only;
|
||||
- };
|
||||
-
|
||||
- partition@80000 {
|
||||
- label = "u-boot-env";
|
||||
- reg = <0x80000 0x60000>;
|
||||
- read-only;
|
||||
- };
|
||||
-
|
||||
- factory: partition@e0000 {
|
||||
- label = "factory";
|
||||
- reg = <0xe0000 0x60000>;
|
||||
- };
|
||||
-
|
||||
- partition@140000 {
|
||||
- label = "kernel1";
|
||||
- reg = <0x140000 0x300000>;
|
||||
- };
|
||||
-
|
||||
- partition@440000 {
|
||||
- label = "kernel2";
|
||||
- reg = <0x440000 0x300000>;
|
||||
- };
|
||||
-
|
||||
- partition@740000 {
|
||||
- label = "ubi";
|
||||
- reg = <0x740000 0xf7c0000>;
|
||||
- };
|
||||
-};
|
||||
-
|
||||
-&pinctrl {
|
||||
- state_default: pinctrl0 {
|
||||
- gpio {
|
||||
- ralink,group = "uart2", "uart3", "i2c", "pcie", "rgmii2", "jtag";
|
||||
- ralink,function = "gpio";
|
||||
- };
|
||||
- };
|
||||
-};
|
||||
-
|
||||
-&spi0 {
|
||||
- /* This board has 2Mb spi flash soldered in and visible
|
||||
- from manufacturer's firmware.
|
||||
- But this SoC shares spi and nand pins,
|
||||
- and current driver does't handle this sharing well */
|
||||
- status = "disabled";
|
||||
-
|
||||
- m25p80@0 {
|
||||
- #address-cells = <1>;
|
||||
- #size-cells = <1>;
|
||||
- compatible = "jedec,spi-nor";
|
||||
- reg = <1>;
|
||||
- spi-max-frequency = <10000000>;
|
||||
- m25p,chunked-io = <32>;
|
||||
-
|
||||
- partition@0 {
|
||||
- label = "spi";
|
||||
- reg = <0x0 0x200000>;
|
||||
- read-only;
|
||||
- };
|
||||
- };
|
||||
-};
|
||||
-
|
||||
-&xhci {
|
||||
- status = "disabled";
|
||||
};
|
||||
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
|
||||
index 15ea9a13b6310b1454b5b3b92cd8ed30ee6255b3..8218bea84410536151a216cd2cc0300369ad977a 100644
|
||||
--- a/target/linux/ramips/image/mt7621.mk
|
||||
+++ b/target/linux/ramips/image/mt7621.mk
|
||||
@@ -144,6 +144,19 @@ define Device/ubnt-erx
|
||||
endef
|
||||
TARGET_DEVICES += ubnt-erx
|
||||
|
||||
+define Device/ubnt-erx-sfp
|
||||
+ DTS := UBNT-ERX-SFP
|
||||
+ FILESYSTEMS := squashfs
|
||||
+ KERNEL_SIZE := 3145728
|
||||
+ KERNEL := $(KERNEL_DTB) | uImage lzma
|
||||
+ IMAGES := sysupgrade.tar
|
||||
+ KERNEL_INITRAMFS := $$(KERNEL) | ubnt-erx-factory-image $(KDIR)/tmp/$$(KERNEL_INITRAMFS_PREFIX)-factory.tar
|
||||
+ IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
|
||||
+ DEVICE_TITLE := Ubiquiti EdgeRouter X-SFP
|
||||
+ DEVICE_PACKAGES := -kmod-mt76 -kmod-rt2x00-lib -kmod-mac80211 -kmod-cfg80211 -wpad-mini -iwinfo kmod-i2c-algo-pca kmod-gpio-pca953x kmod-i2c-gpio-custom
|
||||
+endef
|
||||
+TARGET_DEVICES += ubnt-erx-sfp
|
||||
+
|
||||
define Device/vr500
|
||||
DTS := VR500
|
||||
IMAGE_SIZE := 66453504
|
||||
|
|
@ -1,15 +1,29 @@
|
|||
# D-Link
|
||||
# BROKEN: No AP+IBSS support, 11s has high packet loss
|
||||
if [ "$BROKEN" ]; then
|
||||
|
||||
## D-Link
|
||||
|
||||
device d-link-dir-860l-b1 dir-860l-b1
|
||||
|
||||
# Ubiquiti
|
||||
|
||||
## ZBT
|
||||
|
||||
device zbt-wg3526 zbt-wg3526
|
||||
factory
|
||||
|
||||
fi
|
||||
|
||||
|
||||
# Devices without WLAN
|
||||
|
||||
## Ubiquiti
|
||||
|
||||
device ubnt-erx ubnt-erx
|
||||
packages '-hostapd-mini'
|
||||
factory
|
||||
sysupgrade '.tar'
|
||||
|
||||
# ZBT
|
||||
|
||||
device zbt-wg3526 zbt-wg3526
|
||||
device ubnt-erx-sfp ubnt-erx-sfp
|
||||
packages '-hostapd-mini'
|
||||
factory
|
||||
sysupgrade '.tar'
|
||||
|
|
|
|||
|
|
@ -4,6 +4,7 @@ $(eval $(call GluonTarget,ar71xx,nand))
|
|||
$(eval $(call GluonTarget,brcm2708,bcm2708))
|
||||
$(eval $(call GluonTarget,brcm2708,bcm2709))
|
||||
$(eval $(call GluonTarget,mpc85xx,generic))
|
||||
$(eval $(call GluonTarget,ramips,mt7621))
|
||||
$(eval $(call GluonTarget,x86,generic))
|
||||
$(eval $(call GluonTarget,x86,geode))
|
||||
$(eval $(call GluonTarget,x86,64))
|
||||
|
|
@ -12,7 +13,6 @@ ifneq ($(BROKEN),)
|
|||
$(eval $(call GluonTarget,ar71xx,mikrotik)) # BROKEN: no sysupgrade support
|
||||
$(eval $(call GluonTarget,ipq806x)) # BROKEN: Untested
|
||||
$(eval $(call GluonTarget,mvebu)) # BROKEN: No AP+IBSS or 11s support
|
||||
$(eval $(call GluonTarget,ramips,mt7621)) # BROKEN: No AP+IBSS support, 11s has high packet loss
|
||||
$(eval $(call GluonTarget,ramips,mt7628)) # BROKEN: No AP+IBSS support
|
||||
$(eval $(call GluonTarget,ramips,rt305x)) # BROKEN: No AP+IBSS support
|
||||
$(eval $(call GluonTarget,sunxi)) # BROKEN: Untested
|
||||
|
|
|
|||
Reference in New Issue